MCP6052-E/SN

Current - Input Bias:	1pA
Base Part Number:	MCP6052
Supplier Device Package:	8-SOIC
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
Voltage - Supply, Single/Dual (±):	1.8 V ~ 6 V
Current - Supply:	30µA
Voltage - Input Offset:	150µV
Series:	--
Gain Bandwidth Product:	385kHz
Slew Rate:	0.15 V/µs
Output Type:	Rail-to-Rail
Number of Circuits:	2
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

MCP6052-E/SN is a low-cost and compact instrumentation amplifier, which increases the input signal range, expands the dynamic range, and provides adjustable gains. It is a new generation of technology product specially designed for compensation applications of industrial, automotive and medical applications.

Application Field

The MCP6052-E/SN is a low-cost instrumentation amplifier designed for an extensive range of industrial, automotive and medical applications. The amplifier consists of two programmable gain differential amplifiers and one output transistor. It is suitable for applications such as pressure sensing, temperature sensing, electro-mechanical transducer compensation, strain gauge based sensor compensation and current sensing. The input signal range of the amplifier can be adjusted between 0-4.5V and the value of its gain can be programmed to fit the specific application.

Working Principle

The MCP6052-E/SN consists of two programmable gain differential amplifiers and one output transistor. It uses a differential input stage to provide high common-mode rejection, low offset voltage and good linearity. The gain of the device can be programmed with the use of an external resistor divider. The amplifier has a low distortion, low noise and high slew rate, making it suitable for applications with high signal bandwidths.The high common-mode rejection ratio of the amplifier ensures that noise signals with a common mode voltage greater than the reference voltage are not amplified. The programmable gain of the amplifier can be adjusted either with a linear or a logarithmic range to fit the specific application.

Conclusion

The MCP6052-E/SN is a low-cost and compact instrumentation amplifier well-suited for compensation applications of various industrial, automotive, and medical applications. It has a differential input stage which allows high common-mode rejection, low offset voltage, and good linearity. The gain of the device can be programmed with the use of an external resistor divider. It has a low distortion, low noise and high slew rate, making it suitable for applications with high signal bandwidths. Therefore, the MCP6052-E/SN is a versatile device that can be utilized to suit a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description