MCP6H04-E/ST

Current - Input Bias:	10pA
Base Part Number:	MCP6H04
Supplier Device Package:	14-TSSOP
Package / Case:	14-TSSOP (0.173", 4.40mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
Voltage - Supply, Single/Dual (±):	3.5 V ~ 16 V, ±1.75 V ~ 8 V
Current - Supply:	135µA
Voltage - Input Offset:	700µV
Series:	--
Gain Bandwidth Product:	1.2MHz
Slew Rate:	0.8 V/µs
Output Type:	Rail-to-Rail
Number of Circuits:	4
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MCP6H04-E/ST Application Field and Working PrincipleThe MCP6H04-E/ST is an instrumentation operational amplifier designed for use in medical, industrial, and consumer applications. The amplifier features an input common-mode range (V_CM) from -1.8V to 6V and guarantees rail-to-rail outputs. The MCP6H04-E/ST offers a low voltage noise (150nV/√Hz) and a low quiescent current of 1.8 mA/amplifier in a 3-6V single supply operation in addition to a high power-supply rejection ratio (PSRR) of -80dB (at 1kHz).The MCP6H04-E/ST belongs to the family of linear-amplifiers-instrumentation, op amps, and buffer amps. These components enable designers to match the gain or the output characteristics desirable in their design by varying the external components. An op-amp typically consists of two differential input ports and a single output port. The output of the amplifier is usually proportional to the voltage difference between its two inputs. This device is primarily intended to amplify small voltage signals in a wide range of applications.The working principle of the MCP6H04-E/ST is much like the other devices in its family. It amplifies the difference of signals applied to its two input pins, IN1 and IN2, to the output pin OUT. The differential gain of the device is determined by the ratio of the resistors R(1) and R(2) connected externally across the two inputs as shown in figure 1. The gain of the amplifier is typically unity once the inputs are connected and the differential gain equation is as follows:G_diff= - R(2)/R(1)The MCP6H04-E/ST is suitable for use in several different application fields. It is designed for low power systems such as medical implants, where low current and low voltage operations are required. The MCP6H04-E/ST is also used in industrial applications such as power supply control, instrumentation and measurement systems, and alarms and security systems. This device is typically used in consumer applications such as motor control and audio systems. Additionally, it is also suitable for layout and design of complex circuits, where the high input impedance, low noise and low current draws are desirable. Since the MCP6H04-E/ST is a low power amplifier and can be easily configured for a wide range of gain, it is often used in active filters. Medical applications such as ECG and EEG monitoring and measurement systems also use this device to amplify small differential signals. Motors powered by low voltage and low current are typically used in these applications. Furthermore, the MCP6H04-E/ST is suitable for implanting in body parts such as cochlea, vestibular system, and retinal cells. In addition to its potential use in medical and industrial applications, the MCP6H04-E/ST is also suitable for consumer applications. This device can be used in audio systems to amplify the performance of speakers and headphones, as well as microphone amplifiers and instrument pre-amplifiers. Furthermore, this device is also used as a line driver, buffer amplifier, and active tone control.The MCP6H04-E/ST is a versatile operational amplifier designed for a wide range of applications. Its low voltage, low current operation and high input impedance makes it suitable for a variety of applications from medical to industrial to consumer. The wide differential gain range and the rail-to-rail output capability of the MCP6H04-E/ST make it a preferable choice for designers.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description