| Allicdata Part #: | MCT-4-ND |
| Manufacturer Part#: |
MCT-4 |
| Price: | $ 0.00 |
| Product Category: | Connectors, Interconnects |
| Manufacturer: | Curtis Industries |
| Short Description: | CONN BARRIER STRIP 4CIRC 0.5" |
| More Detail: | 4 Circuit 0.500" (12.70mm) Barrier Block Connector... |
| DataSheet: |  MCT-4 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Top Termination: | Screws with Captive Plate |
| Material Flammability Rating: | UL94 V-0 |
| Material - Insulation: | Phenol Formaldehyde (Phenolic) |
| Operating Temperature: | 150°C |
| Mounting Type: | Chassis, Panel |
| Terminal Screw Finish: | -- |
| Terminal Screw Material: | -- |
| Color: | -- |
| Features: | Flange |
| Barrier Type: | 2 Wall (Dual) |
| Bottom Termination: | Closed |
| Series: | M |
| Wire Gauge: | 14-22 AWG |
| Voltage Rating: | -- |
| Current Rating: | 15A |
| Number of Rows: | 2 |
| Pitch: | 0.500" (12.70mm) |
| Number of Wire Entries: | 8 |
| Number of Circuits: | 4 |
| Terminal Block Type: | Barrier Block |
| Part Status: | Obsolete |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Terminal Blocks - Barrier Blocks
MCT-4 is an economy standard 4mm terminal block used in a variety of electronic devices. It is a cost-effective solution for the control of power and signal applications. The terminal block features a simple design and mounting capability on any printed circuit board (PCB). With a wide range of possible combinations of pins and barbs, MCT-4 is a great option for many applications.
The MCT-4 Terminal Block is designed to reliably mate and secure two sets of electrical connections. It features 4mm pins / barbs, allowing for up to five connections and is available in a variety of different colors and sizes. The MCT-4 also includes a built-in barrier between adjacent pins, providing protection against accidental contact between pins. The barrier can be placed between any of the five pins to configure the desired connection.
The MCT-4 Terminal Block is most commonly used in applications requiring the electrical connection between two separate areas of a PCB. The design of the terminal block allows for secure, reliable connection in a variety of environments and gain of strength. In addition, the terminal block is a great option for applications requiring the control of current or signal.
The MCT-4 Terminal Block is made from a strong thermoplastic that is UL approved and resistant to most chemicals. This material helps to secure a reliable connection without the need for additional hardware or electrical connection methods. The pins of the terminal block are sized to minimize the risk of accidental contact with other components on the PCB. The design also helps to minimize the amount of heat generated by the connection while maintaining a reliable connection.
The MCT-4 Terminal Block is extremely easy to install and can be stacked to allow for multiple connections. The terminal block also features a quick disconnect feature that allows for easy removal if the terminal block needs to be replaced or repaired. The MCT-4 terminal block is extremely reliable and provides a secure connection.
MCT-4 Terminal Blocks are a great option for applications that require the secure connection between two areas of a PCB. The design of the terminal block allows for secure, reliable connection in a variety of environments while maintaining minimal heat generation. With a wide variety of pins and barbs available, the MCT-4 terminal block is a great choice for cost-effective, secure connection in a variety of applications.
The specific data is subject to PDF, and the above content is for reference
TERM BLOCK BARRIERCircuit Connector,
TERM BLOCK BARRIERCircuit Connector,
CONN TERM BLK WW BARR 8POLE8 Circuit 0.2...
CONN TERM BLK EX BARR 2POLE2 Circuit 0.3...
CONN TERM BLK EX MT END 5POLE5 Circuit 0...
CONN TERM BLK EX MT END 2POLE2 Circuit 0...