MCT61S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An opto-isolator, also known as an opto-coupler, photo-coupler or an optical isolator, is a device that transfers electrical signals between two isolated circuits, while blocking the unwanted passage of other electrical or optoelectronic signals. The MCT611S is a three terminal opto-isolator consisting of a photodiode optically coupled to a transistor. It’s used for photocoupling an AC or DC control signal, to drive a load in either a low level or a high level output application. The MCT611S is not suitable for high-frequency, high-speed switching applications, and it’s also not suitable for isolation between high voltages.

The construction of the MCT611S opto-isolator consists of a monolithic silicon integrated circuit, consisting of a photosensitive IC and a small-power output IC, with lead frames. The photodiode is connected with the emitter of the NPN output transistor, while the collector of the NPN output transistor is connected to ground. The lead frame also connects both the emitter and the collector of the output transistor to separate terminals of the opto-isolator. The first terminal is the output, called ‘Vout’, and the other terminal is the ground, called ‘GND’.

The operating principle of the MCT611S is quite simple. An AC or DC control signal is input to the photodiode of the opto-component, creating a current that forces the output IC’s collector to become saturated, and thus keeping the output device off. When the input control signal increases, a corresponding current is generated, which flows through the photodiode and the emitter of the output IC, forcing the output device into full conduction. Since the photodiode is optically coupled, the input and output circuits are electrically isolated. The photodiode is made from a doped semiconductor substrate, and has a current sensitivity range of approximately 1 to 100 mA/V.

The MCT611S is designed to be used in low level output applications, and the device has a low output current and voltage capability. It’s possible to use the MCT611S as a low voltage switch, since the driving current is usually less than 5 mA. One of the primary applications of the device is to limit the current in DC loads such as resistances, LEDs, and motors. It can also be used to control the speed of AC motors, and it has a higher current and voltage handling capability. In addition, the MCT611S can be used as a low level input protection device, due to its high isolation voltage rating. Additionally, its small size and low power consumption make it an ideal choice for many applications.

In summary, the MCT611S is an opto-isolator designed for use in low level and high level output applications. It provides electrical isolation between the photodiode input and the output device, and its small size and low power consumption make it an ideal choice for use in many applications. The device has a current sensitivity range of 1 to 100 mA/V, which makes it suitable for limiting current in DC load applications, as well as controlling the speed of AC motors. Additionally, its high isolation voltage rating makes it an ideal choice for use as a low level input protection device.

The specific data is subject to PDF, and the above content is for reference