MD130S16M3-BP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Bridge rectifiers are a type of diode used to convert alternating current (AC) to direct current (DC). The bridge rectifier is a full-wave rectifier because it creates a full sine wave by rectifying the AC input signal in both directions. Bridge rectifiers are two-terminal solid-state components which allow current to pass through them in either direction. They contain four diodes that are arranged in a bridge formation.

The MD130S16M3-BP Bridge Rectifier is a 4 phase, 16 Amp bridge rectifier with a voltage rating of 600 VDC. It is designed to provide a regulated direct current power supply output from any AC line voltage Input, eliminating the need for a differential transformer. The MD130S16M3-BP is ideal for applications requiring a reliable, low cost, high current DC power supply, such as power inverters, power supplies, motor drives, renewable energy systems, etc.

The MD130S16M3-BP is designed to bridge an alternating current, converting it into a single, regulated direct current. It is applied using a bipolar junction transistor (BJT) in a constructive process. A BJT is basically an amplifier that can switch large amounts of current in either direction. This is extremely beneficial for power control applications. The transistor works by having a base-emitter voltage that is higher than the base-collector voltage. This allows for a voltage regulation of the DC output. The bridge resolves the range from the lowest to the highest frequency. The bridge allows both the capacitor and measured current to be connected across the AC voltage.

The MD130S16M3-BP bridge rectifier has four diodes arranged to form a bridge circuit. The diodes allow current to flow during one-half of the AC signal cycle and prevent current flow during the other half. During the positive half-cycle, for example, two of the diodes are forward-biased and the other two are reverse-biased. During the negative half cycle, the two reverse-biased diodes turn on, allowing the current to flow in the opposite direction. This allows the bridge to convert the AC input voltage into a DC output voltage.

The MD130S16M3-BP bridge rectifier is designed to be used in a wide range of applications such as renewable energy systems, motor drives and power inverters. It is ideal for applications requiring a reliable, low cost, high current and a regulated DC output power supply. The bridge rectifier offers six different Zener voltage protection, a temperature coefficient of 0.0055, fast turn-on time, and a reverse voltage protection of 600Vpk. It also has a low inductance, a low power drop at high current, and excellent thermal characteristics making it an ideal choice for high power applications.

The MD130S16M3-BP bridge rectifier can reduce power consumption, minimize DC ripple and improve power density, making it perfect for applications in renewable energy systems, motor drives, power inverters and other applications requiring a reliable power supply. It also features a maximum reverse voltage rating of 600V and can handle high current outputs of up to 16A.

The specific data is subject to PDF, and the above content is for reference