MDC3105LT1G Integrated Circuits (ICs) |
|
Allicdata Part #: | MDC3105LT1GOSTR-ND |
Manufacturer Part#: |
MDC3105LT1G |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | ON Semiconductor |
Short Description: | IC RELAY/DRVR INDUCT LOAD SOT23 |
More Detail: | N/A |
DataSheet: | MDC3105LT1G Datasheet/PDF |
Quantity: | 33000 |
Voltage - Supply (Vcc/Vdd): | Not Required |
Base Part Number: | MDC3105 |
Supplier Device Package: | SOT-23-3 (TO-236) |
Package / Case: | TO-236-3, SC-59, SOT-23-3 |
Operating Temperature: | -40°C ~ 85°C (TA) |
Fault Protection: | -- |
Features: | -- |
Input Type: | -- |
Rds On (Typ): | -- |
Current - Output (Max): | 500mA |
Series: | -- |
Voltage - Load: | 6V (Max) |
Interface: | On/Off |
Output Type: | Bipolar |
Output Configuration: | Low Side |
Ratio - Input:Output: | 1:1 |
Number of Outputs: | 1 |
Switch Type: | Relay, Solenoid Driver |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The MDC3105LT1G is a power distribution switch, load driver, and power management switch from ON Semiconductor that is designed for use in applications requiring a high current switching controller. It is offered in a 4-pin, leadless, surface mount package and is ideal for power management applications such as motor control,i home appliances, and industrial equipment. The MDC3105LT1G is a current switching controller that is designed to provide control for high-current switching applications.
The device operates in an active high/open drain configuration, where the high side MOSFET is driven by the logic level input signal. The low side MOSFET is controlled by a logic high actuation signal. The logic levels and the source voltages are independent, allowing the device to be used in both low voltage and high voltage applications. The device features high current load switching capability and can control high inductive loads with minimized voltage drops.
The MDC3105LT1G features a stand-alone power MOSFET driver with single-ended PWM/PFM and low EMI control, fixed-off time pulse-width modulator, adjustable slope compensation for fast turn on time, and an on-chip thermal protection circuit. It also features an adjustable deadtime for duty cycle control and a power MOSFET driver that can accept any voltage from an AC or DC source. The device is also able to provide a wide range of current protection and over temperature protection. Additionally, the device provides diagnostic information through the serial bus.
The MDC3105LT1G is ideal for use in high current, low voltage, and medium voltage applications where high current switching and current protection are required. It can be used to control high power loads such as motors, home appliances, and industrial equipment. It is also suitable for applications where space is limited, such as motor control and power supplies.
The MDC3105LT1G is an efficient and reliable solution for power distribution switching, load drivers, and power management. The device offers an adjustable current threshold and on-chip protection, which ensures the safety and reliability of the application. The device\'s simple and reliable design makes it suitable for a wide range of applications, making it the ideal choice for high power applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
MDC3105LT1G | ON Semicondu... | -- | 33000 | IC RELAY/DRVR INDUCT LOAD... |
MDC3105DMT1G | ON Semicondu... | 0.11 $ | 1000 | IC INDUCTVE LOAD DRIVR 8V... |
MDC3105LT1 | ON Semicondu... | 0.0 $ | 1000 | IC RELAY/DRVR INDUCT LOAD... |
MDC3105DMT1 | ON Semicondu... | 0.0 $ | 1000 | IC INDUCTVE LOAD DRIVR 8V... |
EXPRESS CARD PWR SWITCH
PSC LOAD SWITCH V-DFN3030-10
IC DARL DRIVER ARRAY 4CH
IC USB POWER SWITCH 8MSOP
IC SW IPS 1CH HIGH SIDE D2PAK-5
IC SW IPS 1CH HIGH SIDE 8SOIC