MDCM30AP480M160A50

Current - Output (Max):	3.34A
Size / Dimension:	1.52" L x 0.90" W x 0.29" H (38.7mm x 22.8mm x 7.3mm)
Package / Case:	9-DIP Module
Mounting Type:	Through Hole
Efficiency:	90.8%
Operating Temperature:	-55°C ~ 125°C
Features:	OCP, OTP, OVP, SCP, UVLO
Applications:	--
Voltage - Isolation:	2.25kV
Power (Watts):	160W
Series:	VI Chip® DCM®
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	48V
Voltage - Input (Max):	40V
Voltage - Input (Min):	9V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC DC converters are electronic circuits used to convert direct current (DC) from one voltage level to another. These circuits are generally used in consumer and industrial electronic applications, including applications that require isolation, voltage regulation, and/or power factor correction. The most common type of DC DC converter is a buck converter; however, other types of converters, such as buck-boost, multiple output, and pulse width modulated (PWM) converters, are also available.

MDCM30AP480M160A50 DC DC Converter

The MDCM30AP480M160A50 is a high-efficiency, low-cost DC DC converter that can be used in a variety of applications. It is an open-frame, board-mounted module with a wide input voltage range of 4.5 – 270VDC and output voltage range of 2.5 – 16 VDC. It has an adjustable output current of up to 30A and provides up to 1W of power. It is a buck-type converter and features a ripple current of 0.25%.The MDCM30AP480M160A50 can be used to power a variety of electronic devices, including processors, memories, and communications systems. It is particularly useful in embedded designs, where power requirements are rapidly changing, and space is limited. It is also well-suited for applications where high reliability is required, such as automotive and aerospace applications.

Working Principle

The working principle of a DC DC converter is based on the operation of an electronic switch. The switch is used to control the flow of energy from the input voltage source to the output voltage source. The switch is turned on and off in rapid succession, in a controlled manner, allowing for precise control over the output voltage.In the case of the MDCM30AP480M160A50, the switch is an N-channel MOSFET. The MOSFET is used to control the flow of energy from the input to the output, and to regulate the output voltage. The MOSFET is connected to an inductor, which stores energy in the form of a magnetic field when the switch is on, and releases energy as current when the switch is off. A capacitor is connected to the output of the converter, which helps to filter out any noise or transients on the output voltage.The output voltage of a DC DC converter can be adjusted by varying the duty cycle of the switch. The duty cycle is the ratio of the switch’s on-time to its off-time. By varying the duty cycle, the output voltage can be varied as desired. This is a very useful feature, as it allows the output voltage to be precisely controlled in order to meet the needs of a given application.

Conclusion

The MDCM30AP480M160A50 is a high-efficiency, low-cost DC DC converter that can be used in a variety of applications. It is an open-frame, board-mounted module with a wide input voltage range of 4.5 – 270VDC and output voltage range of 2.5 – 16 VDC. It is a buck-type converter that features an adjustable output current of up to 30A and provides up to 1W of power. It is well-suited for embedded designs, where power requirements are rapidly changing, and space is limited, as well as for applications where high reliability is required, such as automotive and aerospace applications. The output voltage of the converter can be precisely controlled by varying the duty cycle of the switch.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description