MDH10060C-471MA=P3 Inductors, Coils, Chokes

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors

The MDH10060C-471MA=P3, is a fixed inductor, which is widely used for various applications such as filtering, DC-DC converters, actuator drives, motor drives, and DC-AC inverters.

The purpose of an inductor is to store energy in the form of a magnetic field. When a voltage is applied to an inductor, a current will flow, causing a magnetic field to be generated within the inductor. The inductance is a measure of the amount of signal that the inductor can store. The MDH10060C-471MA=P3 fixed inductor has a rated inductance of 4.7 mH, which allows it to store a greater amount of signal than other inductors.

Fixed inductors are used in various applications to filter out unwanted signals or noise. In AC systems, they are used for power factor correction and harmonic filtering. They can also be used to provide a low-pass filter, which is used to reduce high-frequency noise signals in communications equipment. In DC-DC converters, they are typically used to convert an AC signal to a DC signal, and can also be used to provide a reference voltage or a constant voltage. In actuator drives, motor drives, and DC-AC inverters, they are used to provide a regulated inductance.

The MDH10060C-471MA=P3 fixed inductor is constructed from a non-magnetic core, usually made from a powdered iron material. The inductor is then wrapped with a number of turns of wire, usually copper, which forms the electrical path. The number of turns of wire determines the amount of inductance the inductor will have. The core and wire are then encapsulated in a plastic or resin material to protect it from the environment.

The working principle of a fixed inductor is based on Faraday’s law of induction. This states that whenever a current flows through a conductor, B fields are set up, which in turn induce an opposed E field. The intensity of the field is proportional to the rate of change of current in the conductor. When a current is applied to the MDH10060C-471MA=P3 inductor, a magnetic field is generated around the inductor, storing energy in the form of a magnetic field.

When a voltage is applied, a current will flow through the inductor. This will generate a magnetic field, which in turn induces a voltage in the impedance of the circuit. The amount of voltage induced is proportional to the amount of inductance present. The MDH10060C-471MA=P3 inductor has a rated inductance of 4.7 mH, so it will induce a higher voltage than other inductors with a lower inductance.

The MDH10060C-471MA=P3 fixed inductor is used in a wide range of applications such as filtering, DC-DC converters, actuator drives, motor drives, and DC-AC inverters. In each application, the inductor is used to provide filtering and regulation of voltage to ensure that the desired result is achieved.

The specific data is subject to PDF, and the above content is for reference