MDH6045C-100MB=P3

Q @ Freq:	--
Height - Seated (Max):	0.189" (4.80mm)
Size / Dimension:	0.248" L x 0.236" W (6.30mm x 6.00mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Features:	--
Inductance Frequency - Test:	100kHz
Operating Temperature:	-55°C ~ 150°C
Ratings:	AEC-Q200
Frequency - Self Resonant:	--
Series:	MDH6045C
DC Resistance (DCR):	38 mOhm
Shielding:	Unshielded
Current - Saturation:	1.8A
Current Rating:	2A
Tolerance:	±20%
Inductance:	10µH
Material - Core:	Ferrite
Type:	Wirewound
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors: MDH6045C-100MB=P3 application field and working principle

Fixed inductors are electrical components that are widely used in a variety of electronic designs. They are commonly used for converting alternating current (AC) to direct current (DC) and amplifying radar signals. Inductors are also used for filtering and noise reduction, protecting delicate components from surges, controlling signals, and generating electrical fields. The MDH6045C-100MB=P3 is a fixed inductor designed for high current rated applications. The article will discuss the application field of the MDH6045C-100MB=P3 inductor and its internal working principle.

Application Field

The MDH6045C-100MB=P3 fixed inductor is designed to meet the requirements of a high current device. This inductor has a capacitance rating of 100 mH and a current rating of 600 Amp. It is also designed with a high temperature tolerance, allowing it to tolerate temperatures of up to 155 Celsius. The application field of the MDH6045C-100MB=P3 inductor is quite diverse. It is typically used in power electronics such as voltage regulation, power conversion, inverters, and power supplies. It is also suitable for use in radio frequency (RF) and microwave applications, such as amplifiers and filters. Moreover, the MDH6045C-100MB=P3 can be used for signal filtering, power factor correction, noise reduction, and damping applications.

Working Principle

An inductor is a type of passive electrical component that is made up of a coil of wire and a core material that acts to limit the flow of electrons. The core material serves to increase the inductance of the inductor. When a current flows through the coil, it creates a magnetic field around the inductor. The magnetic field will induce a voltage in the coil which is opposite of the applied current. The magnitude of the voltage induced in the coil depends on the rate of change of the current flowing through it. This makes an inductor suitable for use in a variety of applications as the magnitude of the voltage induced can be easily controlled by varying the rate of change of the current. The MDH6045C-100MB=P3 inductor is designed to be very efficient. It features a 14 mm fixed inductor with a temperature rating of 155 Celsius and an operating temperature range of -40 to +105 Celsius. The inductor is designed to have very low eddy current losses and is suitable for use in high frequency applications such as RF and microwave.

Conclusion

In conclusion, the MDH6045C-100MB=P3 is a fixed inductor designed for high current applications. It has a capacitance rating of 100 mH and a current rating of 600 Amps. It is suitable for use in power electronics, RF and microwave applications, signal filtering, power factor correction, noise reduction, and damping applications. The inductor is designed to have very low eddy current losses and is suitable for use in high frequency applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description