MF60152VX-1000U-A99

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Feature

    1. input power

        Under the conditions of clean air (static pressure=0), ambient temperature of 25°C, and shaft level, measured after continuous operation at rated voltage for 10 minutes.

    2. Rated current

        In clean air (static pressure = 0), ambient temperature 25°C, shaft level, measured after 10 minutes of continuous operation at rated voltage

    3. Rated speed

        Under the conditions of clean air (static pressure=0), ambient temperature of 25°C, and shaft level, measured after continuous operation at rated voltage for 10 minutes.

    4. Starting voltage

        Using the shaft level, measure the voltage at which the fan can start in clean air (static pressure = 0) by turning the fan on at this voltage. It's not constantly increasing voltage adjustments.

    5. Airflow and Static Pressure

        Use dual chambers according to AMCA 210 or DIN 24163. Record these values when the fan speed stabilizes at rated voltage.

2. Describe

    1. Do not use or operate this fan beyond the limits specified in this specification. SUNON IS NOT RESPONSIBLE FOR THIS FAN'S INPERFORMANCE AND/OR ANY DAMAGE RESULTING FROM USE IF USE OR OPERATION IS NOT IN ACCORDANCE WITH SPECIFICATIONS.

    2. SUNON recommends adding protection circuits such as thermal fuses, current fuses or thermal protectors to the product or application where this fan is installed. Failure to use such equipment may result in smoke, fire, electric shock, shock from insulation degradation in the event of a motor lead short, overload or overvoltage, and/or other faults.

    3. If there is a possibility of reverse connection between VDC(+) and GND(-), SUNON recommends to install a protection device in the product or application where this fan is installed. Failure to install such equipment may result in smoke, fire and/or destruction, although these conditions may not be immediately apparent.

    4. The installation and use of this fan must comply with all applicable safety standards and regulations

    5. Use caution when handling and/or installing this fan. Improper operation or installation of this fan may result in damage resulting in an unsafe situation.

    6. Exercise caution during installation and/or wiring. Failure to use properly may damage certain components of the fan, including but not limited to coils and leads, which may result in smoke and/or fire

    7. Do not use power or ground PWM to control fan speed. If the fan speed needs to be adjusted, please contact SUNON for a custom product design for your application.

    8. For critical or extreme environments, including uninterrupted operation, please contact SUNON and we will be happy to assist you with your product selection to ensure the right cooling product for your application