MFP1WSBBD52-800R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are classified as a type of resistor that needs to be mounted to a printed circuit board (PCB) through the use of a hole, hence the name. The most common type of through hole resistor is the MFP1WSBBD52-800R, which has become popular due to its excellent performance coupled with its cost-effectiveness. This type of resistor is often used in a wide range of applications, from small-signal circuits to power supply circuits.

The MFP1WSBBD52-800R is made using two layers of metalized polyester. The outer layer is a substrate laminated to the resistor, while the inner layer of metalization is etched onto a material to provide the electrical connection between the PCB terminal and the resistor. This type of resistor has very low voltage drop and is a reliable, low-resistance product with virtually no capacitance change. It is a popular choice among engineers due mainly to its superior performance.

The working principle of the MFP1WSBBD52-800R through-hole resistor is fairly simple. Essentially, when a current is applied to the PCB, the resistance of the resistor is increased. This is due to a decrease in current along the resistor and an increase in voltage across the contacts. This causes an electrical voltage-current (VI) curve to be produced, which determines the current and voltage that will flow through the resistor when a specific voltage is applied.

The resistance value of the MFP1WSBBD52-800R is dependent on the value chosen for the maximum voltage. Generally, the higher the voltage applied to the resistor, the higher its resistance will be. This is due to a decreased current throughput near the resistor terminals, and a consequent decrease in voltage drop along the resistor. As such, the VI curve is dependent on the maximum voltage applied to the resistor and is used to determine the amount of current that can be safely applied to the resistor.

Due to its outstanding performance, and reliability, the MFP1WSBBD52-800R through-hole resistor is used in many applications. These include computer systems, industrial equipment, power systems, and many other electrical applications. It is also a preferred choice for small power supplies, due to its low voltage drop and its excellent power handling capacity. Finally, due to its low cost, and superior performance, it is often used as a cost-effective alternative to high-powered resistors that would otherwise be more expensive.

In summary, the MFP1WSBBD52-800R through-hole resistor is a reliable and cost-effective resistor with superior performance. It is used extensively in a variety of applications, from small-signal circuits to power supply circuits. It works by increasing its resistance when a current is applied to the PCB, thus producing an electrical VI curve, which determines the voltage and current allowed to pass through the resistor. As such, it is a popular choice among engineers, and is often used in computer systems, industrial equipment, power systems, and many other electrical applications.

The specific data is subject to PDF, and the above content is for reference