MFP50SBRD52-5K11

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

A resistor is an electrical or electronic component with a variable and finite resistance value (Ohm, Ω) which is used to limit, control, provide a different voltage drop or dissipate excessive power. Resistance and power rating are the two main properties of resistors. By connecting two resistors in series or parallel, a wide range of resistance and power ratings can be achieved.Through-hole resistors (axial or radial) are one such commonly used type of resistors. Through-hole resistors are manufactured with carbon resistive element and come in different sizes. The end caps (snaps) are made from tin-plated copper while the main body of the resistor is an electrically insulating material or ceramic rod.The most common construction of through-hole resistors is a small cylinder containing an insulating material called a core. On either side of the core is a thin wire, usually made of nickel-chromium alloy, called a winding. In a through-hole resistor, these two wires are put into the holes of the core material. These two wires create a loop of electrical resistance around the core material. The resistance is determined by the wire material, the diameter of each wire, and the number of turns.

MFP50SBRD52-5K11 application field and working principle

MFP50SBRD52-5K11 is a through-hole resistor manufactured by Elastimold. It has a resistance value of 5000 ohms and a power rating of 0.5 watts. It features five bands of color coded color dots and a small white "DF" code on the core. The resistance value of the resistor is displayed in the form of a four digit code on the left and the tolerance on the right. The tolerance indicates the accuracy of the resistor\'s resistance value.The MFP50SBRD52-5K11 is mainly used for limiting, controlling and providing different voltage drops in electrical circuits. It also helps in dissipating excessive power generated by the circuit. This type of resistor is suitable for use in both through-hole and surface mount systems.The working principle of MFP50SBRD52-5K11 is similar to that of any other type of through-hole resistor. It is basically made up of a core that can resist the electricity that passes through it. The core is wrapped with two thin wires that create a loop of resistance. The resistance value is determined by the material, diameter of each wire, and the number of turns. The resistive element is then covered with a protective coating to further prevent any interference with the resistor\'s conductivity.

The specific data is subject to PDF, and the above content is for reference