MFR100FRE52-11K5

Through Hole Resistors

A through hole resistor is an electronic resistor whose body is either contained in or passes through a hole in a printed circuit board (PCB). Through hole resistors have metal ends or pins that must be soldered into place and their surface is typically marked with the resistor\'s resistance value and tolerances. These type of resistors are typically ubiquitous in electronic circuits, especially since many integrated circuits require external components for complete functionality.

MFR100FRE52-11K5

MFR100FRE52-11K5 is an axial leaded through hole resistor. It has a resistance of 11k ohms ± 10% and a rated power of 0.6 watts. It is a standard power through hole resistor, used in a number of applications as part of an electrical circuit. It is typically found in consumer electronics and a variety of other electrical devices.

The two metal ends of the resistor are connected at one end to a metal shielding, while the other end is electrically isolated from the shielding. This allows electricity to pass through the leads, creating a voltage drop across the resistor\'s body. The size of the voltage drop depends on the size of the resistance value and on the current passing through the resistor. This voltage drop results in electrical power being dissipated through the resistor, which is why the resistor needs to be rated for the desired power rating to ensure that it doesn\'t overheat.

The size of the resistor is also important; the higher the resistance value, the larger the resistor must be in order to dissipate the same amount of power. This means that higher resistance values must be accommodated by larger packages such as the MFR100FRE52-11K5. This type of through hole resistor is commonly used in audio and power management circuits, such as amplifiers, power supplies, and motor control applications.

Benefits of Using Through Hole Resistor

The main benefit of using through hole resistors is that they are easy to build and assemble. Through hole resistors are typically more reliable and durable than other types of resistors because they are physically larger and have greater heat dissipation capacity. Additionally, they are relatively small in comparison to modern surface mount resistors, which allows them to be placed in small spaces. This makes them useful for applications where space is limited, such as cell phones or other handheld devices.

Through hole resistors are also more resistant to short circuits and other external forces since the pins are molded directly into the body of the resistor, providing better strain relief during soldering. This type of resistor is also preferred for high voltage and current applications due to its large body and pin size. In addition, the connections of the pins allow them to remain mechanically and electrically intact even after many cycles of temperature changes, making them especially suitable for military and aerospace applications.

Conclusion

Through hole resistors, such as the MFR100FRE52-11K5, offer many benefits to applications that require a standard resistor at a reasonable cost. This type of resistor is ideal for a variety of applications, including audio and power management circuits, high voltage and current applications, and military and aerospace applications. Additionally, it is easy to install and provides reliable performance, with a good heat dissipation capacity, for many years.