MFR100FRE52-1M37

Series:	MFR
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	1.37 MOhms
Tolerance:	±1%
Power (Watts):	1W
Composition:	Metal Film
Features:	--
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.177" Dia x 0.453" L (4.50mm x 11.50mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: MFR100FRE52-1M37 application field and working principle

Through-hole resistors are among the most common components used in electronic circuitry. They are typically cylindrical in shape and have two metal leads or terminals that protrude from the resistive element for connection to other parts of a circuit. They come in a variety of shapes, sizes and values. For example, the MFR100FRE52-1M37 is a 0.1 ohm, 1/8W, ±5%, Through Hole Resistor.

The Applications of MFR100FRE52-1M37

The MFR100FRE52-1M37 can be used in a wide range of electronic and electrical applications. Firstly, it can be used to limit the amount of current flowing in a circuit, thus protecting the circuit from damage. This is especially important when the circuit is connected to high-powered devices such as motors, transformers and heaters. It can also be used to increase the power output of some devices by increasing the amount of current flowing in the circuit.It can also be used to fine-tune electronic circuits. By varying the resistance of the resistor, the electrical signal flowing through the circuit can be modified. This can be used for volume control, frequency selectivity, signal levels and other aspects of the circuit.Finally, the MFR100FRE52-1M37 can be used to generate heat in a circuit. This is done by connecting it in series with a power source, and the heat generated from the resistor can then be used to drive solenoids, thermal switches and heating elements.

How the MFR100FRE52-1M37 Works

The MFR100FRE52-1M37 is a through hole resistor, meaning it has two metal leads or terminals that protrude from the resistive element for connection to other parts of a circuit. The resistive element is a metal oxide film, which is encased in a glass shell. This film is heated until it has an electrical resistance that is close to the desired value. This value is then marked on the side of the resistor for easy identification.When an electrical current is passed through a resistor, its resistive element will resist the passage of the current. This resistance is measured in ohms and is the main factor that determines how much current is allowed to flow through it. For instance, the MFR100FRE52-1M37 has a resistance of 0.1ohms. This means it will allow a current of 10 amps to flow through it if a voltage of 1volt is applied to it.

Conclusion

The MFR100FRE52-1M37 is a type of through hole resistor that can be used for a variety of purposes. It can be used to limit the current passing through a circuit, to increase the power output of some devices, to fine-tune electronic circuits and to generate heat in a circuit. It works by resisting the passage of current and its resistance is marked on the side of the element for easy identification. Through-hole resistors are an essential component in many electronic circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description