MFR100FTE52-100K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are widely used in the electronics industry to provide electrical resistance and control current flow in a wide range of applications. The MFR100FTE52-100K is a popular through hole resistor which is used in a variety of applications. The purpose of this article is to discuss the application field and working principle of the MFR100FTE52-100K.

Applications

The MFR100FTE52-100K is a through-hole resistor that is well-suited for a wide range of applications. It is most commonly used in electronic circuits such as amplifiers, digital circuitry, and computers. It can be used to regulate power flow in a circuit, to protect components from voltage surges, and to provide a voltage divider between two components in a circuit. In addition, it can be used as an ammeter to measure current in a circuit. Finally, the MFR100FTE52-100K can also be used as a filter to dampen radio frequency noise, as well as to eliminate unwanted high frequency signals.

Working Principle

The working principle of through hole resistors is based on the idea of electrical resistance. When an electric current, or flow of electrons, passes through a resistor, some of the energy is dissipated as heat due to the resistance of the resistor. This resistance is measured in ohms, and is determined by the length and cross-sectional area of the resistor. The MFR100FTE52-100K has a resistance of 100K ohms.

The MFR100FTE52-100K also has an absorption coefficient which defines its ability to absorb power. When power is applied to a resistive component, some of the power is dissipated as heat due to the absorption coefficient of the component. This coefficient can be measured in watts per cubic meter, and is determined by the material of the resistor. The MFR100FTE52-100K has an absorption coefficient of 0.074 watts per cubic meter.

Finally, the MFR100FTE52-100K has a power rating which determines the maximum amount of power it can handle before it begins to overheat or fail. This rating is measured in watts, and can be determined by the resistivity of the component as well as the temperature coefficient of the component. The MFR100FTE52-100K has a power rating of 3 Watts.

Conclusion

The MFR100FTE52-100K is a through-hole resistor that is well-suited for a wide range of applications such as regulating power flow in a circuit, protecting components from voltage surges, providing a voltage divider between two components in a circuit, and acting as a filter to dampen radio frequency noise. The resistor operates on the principle of electrical resistance, and has a resistance of 100K ohms, an absorption coefficient of 0.074 watts per cubic meter, and a power rating of 3 Watts.

The specific data is subject to PDF, and the above content is for reference