MFR100FTF73-15R4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors can be found in many electrical applications, ranging from basic level circuit design to complex systems. The MFR100FTF73-15R4 is a through hole resistor which is used in a number of different applications. This article will discuss the application field and working principle of the MFR100FTF73-15R4.

The application field for through hole resistors like the MFR100FTF73-15R4 is very broad. It may be used for a variety of resistive applications, including voltage divider networks, current limiting, wave shaping, and more. The MFR100FTF73-15R4 is commonly found in high-frequency, high-power, and precision circuits. It can also be used to reduce RF interference. In addition, this through hole resistor can be used to control the rate of temperature change in a circuit, providing protection from temperature extremes.

The MFR100FTF73-15R4 has a working principle based on Ohm’s law. This law states that the current flowing through a conductor is directly proportional to the applied voltage across it. In terms of resistors, this means that the current through the resistor is inversely proportional to the resistance. The MFR100FTF73-15R4 has a fixed resistance, meaning that it will always pass the same amount of current, regardless of the voltage applied to the resistor.

The MFR100FTF73-15R4 has a wattage rating of 15 watts, meaning that it can handle high current loads. The tolerance of the resistor is ±5%, which means that the actual resistance of the resistor will be between 95% and 105% of the stated value. The MFR100FTF73-15R4 is also rated to handle temperatures up to 135°C, making it suitable for many high-temperature applications.

The MFR100FTF73-15R4 is a through hole resistor, which means that it is designed to be mounted on a circuit board and soldered in place. Through hole resistors use stranded wire for the electrical connections, which ensures that the connection stays secure and does not come loose over time. The wires are then inserted into the holes in the resistor, and then soldered in place. This makes the MFR100FTF73-15R4 an ideal choice for applications which require secure, reliable connections.

The MFR100FTF73-15R4 is a through hole resistor with a wide range of applications. It is most commonly used in high-frequency, high-power and precision circuits. It has a working principle based on Ohm’s law and is rated to handle up to 15 watts of power at temperatures up to 135° C. The MFR100FTF73-15R4 is a reliable and secure choice for many circuit designs due to its through hole design.

The specific data is subject to PDF, and the above content is for reference