MFR100FTF52-402R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are electronic components that limit or regulate the flow of electric currents. This article will discuss the application field and working principle of the MFR100FTF52-402R through hole resistor.

MFR100FTF52-402R resistors are constructed with a ceramic/glass substrate and two metal electrodes, which are placed on each side of the ceramic/glass substrate. The ceramic/glass substrate contains a special material called a resistive element, which is a thin layer of metal that limits the current flows through the resistor. A through hole resistor also includes two mounting holes which are used to secure the resistor in place on a printed circuit board (PCB). The two mounting holes are usually used to connect the resistor to the ground plane and/or a power source.

The application field of the MFR100FTF52-402R through hole resistor mainly involves high power and voltage applications, and is used mainly for power management and distribution tasks. The MFR100FTF52-402R is designed to be used in automotive, military, aerospace, and medical applications, where reliable performance is essential. This resistor can also be used in applications such as portable computer and cell phone power supplies, and in a variety of other high-frequency, high-current, and high-voltage devices.

The main advantage of using a MFR100FTF52-402R through hole resistor is its stability and accuracy. The resistive element in these resistors is designed to be non-toxic, temperature resistant, and radiation resistant, meaning the MFR100FTF52-402R can be used in extreme conditions that would damage other resistors. The resistance value of the MFR100FTF52-402R also remains stable over time, even when exposed to high temperatures and vibrations.

The working principle of the MFR100FTF52-402R throughhole resistor is as follows. When an electric current is passed through the resistor, the current is limited by the resistive element. The amount of resistance is proportional to the resistive material\'s thickness, meaning the thicker the resistive element, the more resistance is produced. The voltage across the resistor is also proportional to the electric current passing through the resistor, meaning the higher the voltage, the higher the current will be.

In conclusion, the MFR100FTF52-402R through hole resistors are well-suited for high power and voltage applications. It is designed to be stable, accurate, and temperature resistant. The resistive element is also thick enough to provide adequate resistance for the intended application. And finally, the working principle of the resistor is such that it limits the current flow, and the voltage across the resistor is directly proportional to the current passing through it.

The specific data is subject to PDF, and the above content is for reference