MFR100FTF73-56K2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are electronic components widely used in a variety of applications, from simple resistive loads to calibrated sensors. Of the types available, MFR100FTF73-56K2 is a product espcially designed for high temperature applications. It is a type of fusible resistor and is often used as a power resistor, current sensing device or fusible element in power supplies.

The MFR100FTF73-56K2 is a low profile, high temperature through-hole resistor with a power rating of 100W and a resistance value of 56K2. It has a high working temperature of 200°C and an overload of 200A. The resistor is constructed from a special alloy that is designed for high temperature and overload conditions and features a conical design for better heat dissipation.

The MFR100FTF73-56K2 is designed for use in power supplies, motor control circuits, automation and other power electronic applications. The resistor can be used to limit the current in a circuit by providing a resistive load, and can protect other components in the circuit by absorbing and dissipating excess current. It can also be used to enable current sensing, providing a current sensing circuit with a known, pre-determined current measurement range.

The working principle of the resistor is similar to that of a conventional resistor. When a voltage is applied across the resistor terminals, a current is generated in proportion to the applied voltage. This current is then divided into two parts, one part passing through the resistor and the other part flowing back to the source. The sum of the two parts is the total current in the circuit, and the difference is the current flowing through the resistor, which is proportional to the applied voltage.

The MFR100FTF73-56K2 resistor is also suitable for use in demand response applications, such as those found in smart grids. When the demand of a grid rises, the MFR100FTF73-56K2 can be used to limit the current and prevent overloads from occurring. The resistor can also be used in short-circuit protection applications, by limiting the current in the event of a short circuit.

The MFR100FTF73-56K2 is a high power, capable of operating at high temperatures with a pre-determined overload. It is suitable for use in a variety of applications, and is particularly suited for medical electronics, power supplies and motor controls, as well as fusible elements and current monitoring circuits. The resistor provides reliable performance and protection, and is designed to withstand high temperature conditions and overloads.

The specific data is subject to PDF, and the above content is for reference