MFR1WSFBE52-51K1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

A Through Hole Resistor, or THR, is a type of resistor mounted through a hole in a printed circuit board (PCB) and wired to the components on the board. It is widely used in electronics circuits to provide isolation from electrical noise and to limit the current in a circuit. The most common type of THR is the MFR1WSFBE52-51K1 Through Hole Resistor.

MFR1WSFBE52-51K1 Through Hole Resistors are used in a wide range of applications – from consumer electronics to industrial instrumentation. It is a popular choice for use in projects with budget constraints since the cost is lower than other through-hole resistors. The main advantages of using MFR1WSFBE52-51K1 are its ease of installation, high reliability and resistance to damage from electrical surges.

The MFR1WSFBE52-51K1 is a “single-ended” through-hole resistor, meaning that the resistor is installed inside a single plastic shell, with two leads, one on the top, and one on the bottom. The two leads are connected to the plated through holes on the PC board, allowing the resistor to be mounted into the hole in the board. This type of resistor has a high current-handling capability and uses an external resistor to create the required resistance value.

The working principle of the MFR1WSFBE52-51K1 is simple. When electricity is passed through the resistor, electrons flow through the metallic body of the resistor, and a resistive force is generated. This resistive force eventually decreases the current flow through the circuit, providing reduced voltage and current levels, as specified by the designer.

The resistance of the MFR1WSFBE52-51K1 is determined by the composition of the internal resistors as well as the diameter and length of the metallic housing. The resistance value of the resistor is normally printed on the body of the resistor and is specified in Ohms. Generally, these Through Hole Resistors are heat-resistant and can handle temperatures up to 155°C (311°F), although mounting of the resistor on a cool pad can help to reduce changes in the resistance value caused by temperature fluctuations.

MFR1WSFBE52-51K1 Through Hole Resistors are commonly used as inline resistors in consumer and industrial applications, usually operating at a given resistance setting over the course of normal use. The resistors have also been tested in a variety of experiments where they showed minimal changes in their electrical characteristics in a wide variety of environmental conditions. It is therefore a good choice for applications requiring stable working conditions over a long period of time.

In conclusion, the MFR1WSFBE52-51K1 Through Hole Resistor is an effective and low-cost component for a wide range of applications, from consumer electronics to industrial instrumentation. It is reliable, resistant to damage from surges, and is capable of handling high currents. It is also relatively easy to install and maintain, making it a popular choice for applications where cost is an important factor.

The specific data is subject to PDF, and the above content is for reference