MFR200DBE73-100K

Series:	MFR
Packaging:	Bulk
Part Status:	Active
Resistance:	100 kOhms
Tolerance:	±0.5%
Power (Watts):	2W
Composition:	Metal Film
Features:	--
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.197" Dia x 0.610" L (5.00mm x 15.50mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole ResistorsThrough hole resistors are commonly used electrical components used in a variety of applications. They are made up of a metal rod, typically either copper or brass, which is surrounded by a ceramic disk to insulate the electrical connection from the metal rod. A small hole is then drilled through the ceramic disk, and the electrical connection along with the metal rod is then threaded through the hole. This type of resistor is then connected to circuit boards or other components via solder, allowing a low-resistance electrical connection.The MFR200DBE73-100K is a type of through hole resistor, and is commonly used in electronic applications such as amplifiers and loudspeakers. It has a resistive value of 100K ohms (100,000 ohms) and a power rating of 5 watts, making it suited for high-power applications. The resistor is usually constructed from a copper or brass rod, covered in a ceramic disk, with holes drilled in it to allow for connection. This type of resistor is commonly used in high-power applications due to its high resistive value and power rating.When it comes to the application of the MFR200DBE73-100K, it is typically used in circuits that require precision and accuracy. This type of resistor is often used in circuits that require accuracy and precision in order to maintain a certain voltage level or current flow rate. For example, they are commonly used in high-power audio systems where a certain voltage level must be maintained in order to reproduce a clear and accurate sound.To understand the working principle behind the MFR200DBE73-100K, it is important to understand the meaning of resistance. Resistance is a measure of how hard it is to pass an electric current through a material. When a voltage is applied to a resistor, it impedes the flow of current through itself mainly due to electrical resistance. This type of resistor is designed to maintain the same resistance regardless of changes in voltage because it is made up of a copper or brass rod surrounded by a ceramic insulation material. This allows the resistor to maintain its resistance even at higher voltages.In summary, the MFR200DBE73-100K is a type of through hole resistor which is commonly used in high-power applications such as amplifiers and loudspeakers. It has a resistive value of 100K ohms, a power rating of 5 watts, and is constructed from either copper or brass rod surrounded by a ceramic disk. The resistor is usually connected to circuit boards or other components via solder, allowing a low-resistance electrical connection. The resistor maintains its given resistance even at higher voltages, and is used in applications that require precision and accuracy in order to maintain a certain voltage level or current flow rate.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description