MFR2WSFTF52-210R

Series:	MFR
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	210 Ohms
Tolerance:	±1%
Power (Watts):	2W
Composition:	Metal Film
Features:	--
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.177" Dia x 0.453" L (4.50mm x 11.50mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

---

Through Hole Resistors

Through hole resistors are used in electrical circuits to limit and evenly distribute the current and voltage. Typically, the electrical current passes uniformly through a resistive element connecting two wire terminations. Through-hole resistors can be used in both AC and DC circuits for many electrical applications, including industrial and consumer applications, and provide a high degree of stability for accurate readings. The MFR2WSFTF52-210R is a through-hole resistor for use in a wide range of medium and high voltage applications. It is a special type of resistive device designed to protect sensitive electronic components from potentially damaging over-voltages or voltage transients. Built with a vast array of specified resistances, the resistor provides a high degree of stability and accuracy for current and voltage readings. The MFR2WSFTF52-210R works by reducing the voltage supplied to the component being protected. This is done by having an impedance between the input and output terminals. As the incoming voltage increases, so does does the opposition presented by the resistor, which reduces the amount of power transmitted. The resistor is also designed to absorb the transient or surge energy created by the input, dissipating it as heat energy instead of passing it on to the component.The MFR2WSFTF52-210R is used for a range of applications, including automotive, telecommunication relay, surge protection and motor controllers, DC-DC converters, power inverters and AC-DC transformers. For these purposes the MFR2WSFTF52-210R can be used as a pre and post regulator to reduce the instantaneous overload while at the same time limiting the AC ripple current and voltage. The majority of through-hole resistors feature an alloy-film composition that not only makes them quite resilient but provides long life and stability. The MFR2WSFTF52-210R is designed to operate in temperatures between -55 and +125 degrees Celsius, with its resistance remaining substantially unchanged across this range.The MFR2WSFTF52-210R is also designed to offer predictable and continued inaccurate readings for both AC and DC circuits. Its resistance will remain unchanged throughout the given operating temperature range, offering consistent and precise results, as well as improved safety protection for the target components.In conclusion, the MFR2WSFTF52-210R is a through hole resistor designed to be used in a wide range of medium and high-voltage applications. Built with an array of specified resistances, the resistor helps to reduce the voltage supplied to target components, dissipate surge energy, and offer consistent and precise readings across a given operating temperature range. As such, the MFR2WSFTF52-210R is a highly useful device for many industrial and consumer applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description