MFR50SFRF52-23R7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A through-hole resistor is an electronic quantity that resists the flow of electrical current. They may be either fixed or variable, but all are used to provide resistance. The MFR50SFRF52-23R7 is an example of a through-hole resistor with a specific application field and working principle.

The MFR50SFRF52-23R7 is a type of axial lead resistor specifically designed to reduce the amount of current that flows through a circuit. It has a high power rating, with a resistance range of 1 ohm to 10 mega ohms and a tolerance of 5%. In addition, the resistor has a peak voltage of 150 volts and a power dissipation of 1/8 watt.

The MFR50SFRF52-23R7 is most often used in voltage regulation and motor controllers as current limiting resistors. By limiting the amount of current, the resistor helps to prevent electrical damage and overheating. The resistor can also be used in other circuits, such as amplifiers or audio equipment, where current needs to be limited.

The working principle of the MFR50SFRF52-23R7 through-hole resistor is based on the Ohm’s law. When a voltage is applied across the resistor terminals, a current will flow through the resistor, based on the resistance of the resistor and the voltage applied. The current flow through the resistor will be equal to the voltage applied divided by the resistor’s resistance. This basic formula, known as Ohm’s law, allows engineers to calculate the current through the resistor and the reduce it to a desired level.

When the MFR50SFRF52-23R7 is used in a circuit, the desired resistive value is determined and then the voltage applied is adjusted to keep the current through the resistor within the rated limit. This helps to prevent overheating and electrical damage that can occur if too much current is allowed to flow through the circuit.

To ensure the best performance, the MFR50SFRF52-23R7 should be connected properly, with the terminals connected correctly. The leads should be securely fastened to the terminals, and the terminals should be connected to the circuit board. Additionally, the resistor should not be exposed to conditions that are too hot, such as direct sunlight, and it should not be exposed to moisture or corrosive materials.

The MFR50SFRF52-23R7 through-hole resistor is an important component of many electronic circuits. By limiting the amount of current in the circuit, it helps to protect circuits from overheating and electrical damage. It is important to properly connect the resistor to the circuit and ensure that it is not exposed to conditions that can damage or affect its performance.

The specific data is subject to PDF, and the above content is for reference