Allicdata Part #: | 516-2859-ND |
Manufacturer Part#: |
MGA-16516-BLKG |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Broadcom Limited |
Short Description: | IC AMP LNA GAAS MMIC DUAL 16QFN |
More Detail: | RF Amplifier IC CDMA, GSM 500MHz ~ 1.7GHz 16-QFN (... |
DataSheet: | MGA-16516-BLKG Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Frequency: | 500MHz ~ 1.7GHz |
P1dB: | 18.3dBm |
Gain: | 17.7dB |
Noise Figure: | 0.4dB |
RF Type: | CDMA, GSM |
Voltage - Supply: | 5V |
Current - Supply: | 100mA |
Test Frequency: | 850MHz |
Package / Case: | 16-VQFN Exposed Pad |
Supplier Device Package: | 16-QFN (4x4) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
An RF amplifier, also known as radio frequency amplifier, is an electronic device that amplifies signals in the radio frequency (RF) range – typically in microwaves, telecommunications, and radio. MGA-16516-BLKG is one type of RF amplifier, specifically designed low noise amplifier for cellular communication applications. It is the most advanced signal amplifier which has been developed to support communications in this frequency range.
The MGA-16516-BLKG amplifies radio frequency signals in the frequency range from 824MHz to 894MHz, with a gain of 15.3dB and a noise figure of 1.25dB. The physical size of this device is very small, being only 2x2mm, allowing it to fit easily into any system where space is a premium. This RF amplifier greatly improved system linearity while also being lightweight and low-cost.
The working principle of this RF amplifier is very simple. By feeding signals into the amplifier’s input, an RF signal of greater magnitude is then produced at the amplifier’s output after being multiplied by a given gain. This occurs when a DC voltage is applied across the amplifier’s input terminals. This DC voltage creates a control voltage, which is then connected to the input of an N-channel MOSFET. The MOSFET was chosen due to its fast switching speed and higher gain than a bipolartransistor (BJT). As the control voltage changes, so too does the resistance of the MOSFET, allowing a different amount of current to flow from the input to the output.
The gain of this RF amplifier can be adjusted by changing the DC voltage applied to the input terminals. This allows the user to fine-tune the amount of amplification they are able to produce from the device. Additionally, the noise figure of the amplifier can be changed by connecting an external noise source to the input. This can be useful in certain applications where a specific amount of noise is required.
The MGA-16516-BLKG is most commonly used in cellular communication applications such as base stations, mobile phones, and modems. It is also well-suited for applications such as satellite communication, aeronautical communication, and military communication. Additionally, this RF amplifier can be used in low power wireless applications such as Bluetooth and Zigbee. The amplifier’s wide frequency range, low noise figure, and small physical size make it an ideal choice for various RF applications.
The MGA-16516-BLKG has been designed to amplify signals from the RF range while also being small and lightweight. This RF amplifier has the ability to adjust the gain and noise figure, making it well suited for a variety of communication applications. The amplifier has also been designed to be low power, allowing for long battery life in mobile applications. Due to its various advantages, the MGA-16516-BLKG has established itself as a top performer in the RF amplifier market.
The specific data is subject to PDF, and the above content is for reference
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...