Allicdata Part #: | 516-2287-ND |
Manufacturer Part#: |
MGA-22003-BLKG |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Broadcom Limited |
Short Description: | IC AMP LNA MOD 2.3-2.7GHZ 3X3MM |
More Detail: | RF Amplifier IC WiMAX / WiBro 2.3GHz ~ 2.7GHz |
DataSheet: | MGA-22003-BLKG Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Cut Strip |
Part Status: | Obsolete |
Frequency: | 2.3GHz ~ 2.7GHz |
P1dB: | 31dBm |
Gain: | 35dB |
Noise Figure: | -- |
RF Type: | WiMAX / WiBro |
Voltage - Supply: | 3 V ~ 5 V |
Current - Supply: | 13mA |
Test Frequency: | 2.5GHz |
Package / Case: | 17-LCC |
Supplier Device Package: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Amplifiers are used to strengthen the strength of low power radio frequency signals. The MGA-22003-BLKG is one of the types of RF amplifiers that are used for strengthening radio frequency signals. Its application field and working principle will be discussed in this article.
Application Field
The MGA-22003-BLKG is mainly used as an amplifier in the mobile communication and base station areas. Its application includes CDMA base station, 200MHz high-frequency amplifier, and RF bushing. It can also be used in short range radio communication and electronic equipment such as radio navigation equipments, electronic measuring instruments, and radio transceivers. Furthermore, the MGA-22003-BLKG can be applied as low power amplifiers in image receivers, cable TV amplifiers, and satellite communication system.
Working Principle
The MGA-22003-BLKG is a monolithic RF power amplifier with three stage amplifier structure. It consists of a pre-stage, intermediate stage, and output stage. In the pre-stage, the input signal is converted into an amplified signal, which is then sent to the intermediate stage. Here, the signal is amplified again to be further sent to the output stage. At the output stage, the signal is amplified again and then sent to the mixer. The mixer combines the amplified signal with the carrier signal, resulting in a stronger radio frequency signal.
The signal is further amplified by the MGA-22003-BLKG amplifier and finally passes through the frequency filter to filter out any unwanted signals. The frequency filter\'s cutoff frequency is adjustable allowing the user to select the frequency range in which the signal will be transmitted. The MGA-22003-BLKG also offers gain-flatness control for precise signal control.
The MGA-22003-BLKG is a high-performance amplifier that offers wide dynamic range, high gain, low distortion, low noise, and high linearity. It also utilizes a high-efficiency design which significantly reduces its power consumption while delivering high gain. It also operates with a low power supply voltage of up to 5V, making it suitable for battery-powered applications.
Conclusion
The MGA-22003-BLKG is an effective RF power amplifier that offers wide dynamic range, high gain, low distortion, low noise, and high linearity. It is mainly used as an amplifier in the mobile communication and base station areas. Its application includes CDMA base station, 200MHz high-frequency amplifier, and RF bushing; as well as short range radio communication and electronic equipment such as radio navigation equipments, electronic measuring instruments, and radio transceivers. Its working principle is based on three stage amplifier structure, employing a pre-stage, intermediate stage, and output stage, and a frequency filter for signal filtering.
The specific data is subject to PDF, and the above content is for reference
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...