Allicdata Part #: | 516-3080-2-ND |
Manufacturer Part#: |
MGA-665P8-TR1 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Broadcom Limited |
Short Description: | IC AMP MMIC LNA GAAS 3V 8-LPCC |
More Detail: | RF Amplifier IC 802.11/WiFi, WLAN 500MHz ~ 6GHz 8-... |
DataSheet: | MGA-665P8-TR1 Datasheet/PDF |
Quantity: | 1000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Frequency: | 500MHz ~ 6GHz |
P1dB: | 11.4dBm |
Gain: | 14.5dB ~ 17.4dB |
Noise Figure: | 1.45dB ~ 1.9dB |
RF Type: | 802.11/WiFi, WLAN |
Voltage - Supply: | 3V |
Current - Supply: | 18.2mA ~ 23.8mA |
Test Frequency: | 2.4GHz |
Package / Case: | 8-WFDFN Exposed Pad |
Supplier Device Package: | 8-LPCC (2x2) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF amplifiers are important components in a wide range of applications. They can be found in both commercial and industrial settings and are most commonly used in radar systems, communications systems, and industrial instrumentation. They are also a key component of some high-power amplifier systems. The MGA-665P8-TR1 is a RF amplifier used in many of such applications.
The MGA-665P8-TR1 is a high-linearity, high-current, high-efficiency amplifier designed specifically for use in high-power RF applications. The amplifier features an integrated driver and power module that provide both high-current and low-noise operation, making it ideally suited for applications such as radar systems, antenna systems, and microwave communications systems. Its linear output is achieved through integrated automatic gain control (AGC) and amplitude detection circuits, which ensure that the signal is accurately amplified at all power levels. The amplifier has a frequency range of 0.5-6GHz, and can deliver up to 32 Watts of output power. The MGA-665P8-TR1 is offered in a compact, surface mount package and is rated for operation up to 90degC.
The working principle of the MGA-665P8-TR1 is relatively simple. It uses an RF signal as an input, which is first amplified by a linear amplifier and then passed through a power module. The power module then converts the linear signal into a high-power, non-linear signal, which is then amplified further by a transistor-based power amplifier. The amplified signal is then sent via a transmission line to the output. The gain of the amplifier is controlled by an AGC circuit which is activated when the signal input reaches a certain power level. The AGC then adjusts the gain of the amplifier to maintain the signal level at its desired level.
The MGA-665P8-TR1 is an ideal choice for high-power RF applications where linearity, high output power, and a small size are critical. It is suitable for use in a wide range of applications, including radar systems, communications systems, and industrial instrumentation. The amplifier is reliable, efficient, and easy to use, making it a low-cost and reliable choice for many RF applications.
The specific data is subject to PDF, and the above content is for reference
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...