Allicdata Part #: | 516-2131-ND |
Manufacturer Part#: |
MGA-86576-STRG |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Broadcom Limited |
Short Description: | IC AMP LNA MMIC GAAS SMD |
More Detail: | RF Amplifier IC ISM 1.5GHz ~ 8GHz 76 Package Ceram... |
DataSheet: | MGA-86576-STRG Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Frequency: | 1.5GHz ~ 8GHz |
P1dB: | 6dBm |
Gain: | 20dB |
Noise Figure: | 1.6dB |
RF Type: | ISM |
Voltage - Supply: | 5V |
Current - Supply: | 22mA |
Test Frequency: | 4GHz |
Package / Case: | Case 76 |
Supplier Device Package: | 76 Package Ceramic |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Amplifiers are a type of electronic device primarily used for signal amplification, radio frequency (RF) signal detection, system gain control, and reception or transmission enhancement. They are commonly used in fields such as broadcasting, military communications, navigational radios, emergency medical alerts, and public address systems. The MGA-86576-STRG is a state-of-the-art RF amplifier, offering a range of features and specifications that make it a functional and powerful device in various applications.
The MGA-86576-STRG consists of two main components: the power amplifier and the low noise amplifier (LNA). The power amplifier is responsible for boosting RF signals by amplifying their output power. It is an ideal device for applications requiring high levels of RF gain but low distortion of the output signal. The LNA is the second component of the MGA-86576-STRG and is responsible for detecting and boosting lower-level signals. This makes the amplifier suitable for applications requiring higher sensitivity and lower noise figures.
In terms of performance, the MGA-86576-STRG offers a maximum gain of 13 dB while maintaining a noise figure of less than 6 dB. It features an operating frequency range of 802 MHz to 935 MHz and can sustain a peak output power of up to 10 Watts. This makes it an ideal device for applications such as signal distribution, microwave radio systems, and emergency services.
In terms of construction, the MGA-86576-STRG is made from a dielectric filled package that is highly robust and is designed to maintain signal strength and performance even when subjected to extreme environmental conditions. This material also provides for excellent thermal conductivity and helps keep the device\'s temperature down even when operating at high power levels. Furthermore, the device is equipped with a thermoprotection system to protect it from potential damage due to overheating or sustained elevated power levels.
The MGA-86576-STRG is powered by a 9.8 - 24 VDC voltage source and features an input/output impedance of 50 ohms. It has a minimum bandwidth of 100 KHz and a typical power-added efficiency of above 60%. The device is operational up to 100°C and can withstand a maximum temperature of 105°C.
In conclusion, due to its high performance, low noise, and robust construction, the MGA-86576-STRG is an ideal device for a variety of RF amplification applications. It features a wide range of features and specifications, making it suitable for use in a variety of settings, from signal distribution to emergency services.
The specific data is subject to PDF, and the above content is for reference
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...