MGM2JT1M00

Series:	MGM
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	1 MOhms
Tolerance:	±5%
Power (Watts):	2W
Composition:	Metal Film
Features:	Flame Retardant Coating, High Voltage, Moisture Resistant, Safety
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-55°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.177" Dia x 0.453" L (4.50mm x 11.50mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MGM2JT1M00 Application Field and Working PrincipleThrough hole resistors (THRs) are useful components in electronic circuits because of their low cost and reliability. The MGM2JT1M00 is a THR with a form factor that is suitable for a variety of applications. This article will discuss the application fields and working principle of the MGM2JT1M00.The MGM2JT1M00 is a leaded THR with a pitch of 27.5 mm and a resistance range of 0Ω to 47kΩ. Its lead diameter is 2.8 mm and its maximum current capacity is 5A. These specifications make the MGM2JT1M00 suitable for applications such as power supply, motors, displays, lighting, laser equipment, and other digital systems.The working principle of THR’s is quite simple. It consists of an electrically conductive material (resistor element), a layer of insulation (insulating material), and two leads (conductive material). When current is applied to the leads, electrons pass through the resistor element and are resisted by the material’s resistance. This resistance creates a potential difference across the resistor, which results in an electrical resistance.THRs are typically used in circuits to reduce current to a safe level, reduce voltage, and provide stability within a circuit. They can also be used to tune an oscillator circuit, cancel out inductive coupling, and provide bias voltage for transistors and integrated circuits.THRs are also commonly used in circuits to protect sensitive electronic components from voltage spikes, prevent short circuits, protect against electrical noise, and reduce EMI/RFI interference. In addition, THRs are used in numerous electronic configurations, such as voltage dividers, current limiting, potential dividers, and crossover networks.THRs are known for their reliability, as they can handle very high temperatures. This is especially important in environments with extreme temperatures, such as those found in automobile and aerospace applications.In conclusion, the MGM2JT1M00 is a reliable leaded THR with a pitch of 27.5 mm and a resistance range of 0Ω to 47kΩ. Its lead diameter is 2.8 mm and its maximum current capacity is 5A. This THR is suitable for a variety of applications due to its reliability and its ability to handle large current capacities. The working principle of THR’s is quite simple; when current is applied to the leads, electrons pass through the resistor element and are resisted by the material’s resistance, creating a potential difference across the resistor. THRs are typically used in circuits to reduce current to a safe level, reduce voltage, and provide stability within a circuit, as well as protect sensitive electronic components from voltage spikes, short circuits, electrical noise, and reduce EMI/RFI interference.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description