MGS102412

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are a form of power supply that transform a direct current (DC) power supply input to a higher or lower voltage output. The MGS102412 is a medium-power DC-DC converter specifically designed to efficiently convert 12V or 24V input to the outputs of 5V, 3.3V, and 1.8V. Different output currents can be provided. With the same circuit design, the user can also set other output voltages via programming software.

The MGS102412 features a synchronous rectification topology that provides up to 95% conversion efficiency from 24V input and standby power as low as 10mW. This device is specifically designed for applications such as industrial automation, communications systems and other related fields where powerful and reliable power conversion solutions are needed. It also meets the requirements of telecom power converters in the latest IEC60950-1 international safety standard.

The main components inside the MGS102412 are two pairs of MOSFETs. Four wires are connected to the converter: two input wires for the input voltage, and two output wires, called “low” and “high” for the different output voltages. The controller chip also has an adjustable output voltage, so one of the outputs can be set to one of the desired levels.

The MGS102412 is set up to operate in the buck-boost converters mode. This mode of operation is achieved by adjusting the feedback loop of the converter. In buck-boost mode, the converter takes the input voltage, converts it to the desired output voltage and then feeds that voltage back to the controller. This feedback allows the controller to adjust the output voltage to maintain the desired output voltage without the need for adjusting the current sense resistor.

The controller is also responsible for the overall protection and control of the MGS102412 by monitoring conditions such as over temperature or output over voltage protection. The IC also contains two PWM outputs that can be used to control four external N-Channel MOSFETs in the synchronous rectification process allowing the user to increase the efficiency of the converter.

The MGS102412 features an on-board current sense resistor, allowing the user to accurately set the output current. It also has an On/Off circuit, which can be used to configure the output current to meet the desired output current. The On/Off signal can be controlled either directly from the feedback signal of the converter or from external control signals.

The MGS102412 also includes an adjustable soft-start circuit, and protection circuitry to ensure safe operation in the event of over-voltage, over-temperature or under-voltage conditions. With its adjustable output voltage and high performance features, the MGS102412 is an ideal choice for many different applications.

The specific data is subject to PDF, and the above content is for reference