MIC3172BN

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MIC3172BN is a 2A/1A/500mA boost converter, available in the 4x4 QFN package, designed for portable applications. It is designed to support a wide range of input voltages from 1.5V to 5.5V and provides 12V output. It features an adjustable output current by load current regulation for load current of 2A, 1A and 500mA.According to the datasheet, the MIC3172BN features an adjustable soft start for initial load current ramp up and output voltage current limit for overcurrent/short circuit protection. Output voltage is adjustable from 0V to 12V and is limited using an over-power protection circuit. Additionally, the device provides thermal shutdown protection in the case of excessive chip temperature.

The MIC3172BN application field is mainly in handheld electronic products and battery powered devices. The specification ranges from mobile phones, portable radios, digital cameras, navigation systems and any other small, low power, portable device. The MIC3172BN is capable of delivering stable output voltage and current, and is able to operate at temperatures as low as -30°C and as high as 85°C. This means it can withstand extreme environments when used in portable electronics. The 2A/1A/500mA boost converter has a precision control system, allowing for accurate adjustment and programming of the output voltage and current.

The MIC3172BN is designed to offer reliability, flexibility and simplicity of use in the application. The device contains a high-performance internal power management unit that controls the boost converter logic and signals, as well as a low dropout regulator. The low dropout regulator keeps the output voltage steady even when the input power is limited. The programming of the boost converter is done through the use of three potentiometers on the device, which can easily be adjusted for the desired output voltage and current level.

The working principle of the MIC3172BN is straight forward. The boost converter has an input voltage that must be regulated and transformed into an output voltage with a desired current level. The device contains two circuit blocks – an inductor and a power MOSFET – that work together to regulate the input and output voltages. The power MOSFET is used to control the inductor current, and it switches the current between the source and the load with each cycle. When the power MOSFET is turned on, the inductor current is increased, which leads to an increase in the output voltage. When the power MOSFET is turned off, the inductor current is decreased, which leads to a decrease in the output voltage. The MIC3172BN also features protection circuits designed to limit the output voltage and current levels, as well as protect the device from overvoltage and over-current conditions.

In conclusion, the MIC3172BN is a highly efficient, 2A/1A/500mA boost converter, designed to provide accurate output stability and protection in low-power, portable electronic applications. The device can be programmed with three potentiometers and an internal power management unit that regulates the inductor current, and switches the current between the source and load with each cycle. Its features include adjustable output voltage, load current regulation for load current of 2A, 1A and 500mA, adjustable soft start, output voltage current limit and over-power protection, and thermal shutdown protection. The MIC3172BN offers reliability, flexibility and simplicity of use in applications ranging from mobile phones, portable radios, digital cameras, navigation systems and any other small, low power, portable device.

The specific data is subject to PDF, and the above content is for reference