MIC384-1BMM-TR

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Discontinued at Digi-Key
Sensor Type:	Digital, Local/Remote
Sensing Temperature - Local:	-55°C ~ 125°C
Sensing Temperature - Remote:	-55°C ~ 125°C
Output Type:	I²C/SMBus
Voltage - Supply:	2.7 V ~ 5.5 V
Resolution:	7 b
Features:	Output Switch, Programmable Limit, Shutdown Mode, Standby Mode
Accuracy - Highest (Lowest):	±2°C (±3°C)
Test Condition:	0°C ~ 100°C (-55°C ~ 125°C)
Operating Temperature:	-55°C ~ 125°C
Mounting Type:	Surface Mount
Package / Case:	8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package:	8-MSOP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Temperature Sensors - Analog and Digital Output

Temperature sensing is an important area of technology, used in a huge range of applications from HVAC automation to industrial process control to consumer electronics. Temperature sensors are devices that measure temperature, typically in degrees Celsius or Fahrenheit. The MIC384-1BMM-TR is one example of a temperature sensor, used in requirements where accuracy and reliability are critical. This is an aggressive technology that falls under the broader category of temperature sensors with analog and/or digital output. Analog output temperature sensors generally involve analog electronics and signal transmission. These devices use a variety of open loops to measure resistance or temperature, producing signals that vary by magnitude or voltage. This signal can then be transmitted over a signal path and converted to an amplified output voltage, and this voltage is then sent over an analog connection for further use. Digital output temperature sensors have very similar functions to analog temperature sensors. However, digital temperature sensors measure the temperature parameters using a closed loop feedback system. This feedback is often conditioned as a digital PID signal, and it is then sent over a digital connection for further use. The MIC384-1BMM-TR is a thermistor device with an analog and digital output. It is designed to measure temperature in the range of -55°C to +125°C, and its accuracy is +/-1°C. The device has an extended wire lead that is included with it, and its pins can be connected to a standard analog voltage source, such as a 12-volt power supply. The device can also be connected to a digital bus, such as a CAN bus, or a closed loop control circuit. The MIC384-1BMM-TR uses a solid-state thermistor as its sensing element. The user has access to two pins on the device; one to measure temperature and the other to measure the resistance of the thermistor. The device also has a digital interface for communication to other digital devices. The device uses a NTC thermistor, which is a semiconductor device that exhibits a decrease in resistance with an increase in temperature. The working principle of the MIC384-1BMM-TR is that it is programmed to measure the resistance of the thermistor passes through two user accessible pins on the device, and using the corresponding predetermined look-up table, the temperature is calculated and displayed as an output voltage. The output voltage can be sent as an analog signal to an analog to digital converter, or it can be sent as a digital signal to a digital to analog converter. Digital communications are done by the CAN (Controller Area Network) bus, allowing the data to be transmitted to a special temperature control device. The MIC384-1BMM-TR is a reliable and robust solution for demanding applications where temperature accuracy is critical. It has a wide range of applications in HVAC systems, industrial process control, and consumer electronics. It is an ideal choice for applications such as engine temperature surveillance, medical systems, and process heating or cooling systems. In summary, the MIC384-1BMM-TR is a digital thermistor used for temperature sensing. It uses a NTC thermistor as its sensing element and contains two pins, one for measuring the temperature and one for resistance of the thermistor. It can be connected to an analog voltage source, or it can use digital communication methods such as the CAN bus. The output is provided as an analog voltage, or as a digital signal. The device is reliable and robust, and is ideal in applications requiring accurate temperature measurement and control.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description