Allicdata Part #: | MJ1270FE-R52-ND |
Manufacturer Part#: |
MJ1270FE-R52 |
Price: | $ 0.01 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 127 OHM 1/8W 1% AXIAL |
More Detail: | 127 Ohms ±1% 0.125W, 1/8W Through Hole Resistor Ax... |
DataSheet: | MJ1270FE-R52 Datasheet/PDF |
Quantity: | 1000 |
50000 +: | $ 0.00414 |
Series: | Metal Devil® MJ |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 127 Ohms |
Tolerance: | ±1% |
Power (Watts): | 0.125W, 1/8W |
Composition: | Metal Film |
Features: | -- |
Temperature Coefficient: | ±50ppm/°C |
Operating Temperature: | -- |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.073" Dia x 0.138" L (1.85mm x 3.50mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Throught-hole resistors, also known as leaded resistors, are resistors that have two leads that protrude from the body of the resistor and are designed to be soldered onto a circuit board. The MJ1270FE- R52 is a through-hole resistor from the renowned Murata manufacturer, and is suitable for a wide range of applications.
The MJ1270FE-R52 series specifically has a resistance value of 52.3 kilohms. The resistance is active across a wide range of temperatures, from -55 to 150\'C. This allows the electronics designer to choose this resistor for circuits operating at very high or very low temperatures and still expect it to perform as intended.
The resistor also has a very low intrinsic voltage coefficient. This means that it can be used in application circuits that are subject to small voltage changes and the resistor value will stay consistent; the voltage coefficient ensures accuracy. In addition, the resistor has a low temperature coefficient. This indicates that the resistance value will remain stable over a wide range of operating temperatures. Finally, it has a high power rating of 1/4 W.
The MJ1270FE-R52 is primarily used to provide current limiting, in applications where the energy must be dissipated as heat in the resistor. In these types of applications, the electrical power produced by the application circuit will be converted into thermal energy, as heat, by the resistor. This makes the resistor suitable for use in low power applications, such as voltage and current sensing, as well as high power circuits such as motor drives and ultrasonic transducers.
The resistor also has a wide range of applications in automotive, medical and industrial electronics. It is often used in circuits which require precise current limiting, as it provides consistent results that are accurate and reliable. The resistor is also used in applications that require a stable voltage coefficient, such as power supplies, motion controllers and DC-DC converters.
The working principle of the MJ1270FE-R52 is quite simple. It is designed to create a resistance between two points when a current is passed through it. The amount of resistance created depends on the size of the resistor and the amount of current that is passing through it. The resistor converts the electrical energy that is passed through it into thermal energy, which is then dissipated as heat.
In summary, the MJ1270FE-R52 series through-hole resistor is a highly reliable and accurate resistor which is suitable for a wide range of applications. It has a wide operating temperature range, a low voltage coefficient and a high power rating, making it an ideal choice for a variety of circuits. The resistor works by creating a resistance between two points when a current is passed through it, converting the electrical energy into thermal energy, and dissipating it as heat.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
MJ1222 | APEM Inc. | 0.08 $ | 1000 | CAP TACTILE ROUND BLACKRo... |
MJ1227 | APEM Inc. | 0.08 $ | 1000 | CAP TACTILE ROUND IVORYRo... |
MJ1221 | APEM Inc. | 0.08 $ | 1000 | CAP TACTILE ROUND BLUERou... |
MJ1215 | APEM Inc. | 0.08 $ | 1000 | CAP TACTILE SQUARE YELLOW... |
MJ1214 | APEM Inc. | 0.18 $ | 1000 | CAP TACTILE SQUARESquare ... |
MJ1211 | APEM Inc. | 0.18 $ | 1000 | CAP TACTILE SQUARE BLUESq... |
MJ1225 | APEM Inc. | 0.18 $ | 1000 | CAP TACTILE ROUND YELLOWR... |
MJ1226 | APEM Inc. | 0.18 $ | 1000 | CAP TACTILE ROUND REDRoun... |
MJ1223 | APEM Inc. | 0.18 $ | 1000 | CAP TACTILE ROUND GREENRo... |
MJ1217 | APEM Inc. | 0.18 $ | 1000 | CAP TACTILE SQUARE IVORYS... |
MJ1213 | APEM Inc. | 0.0 $ | 1000 | CAP TACTILE SQUARE GREENS... |
MJ1216 | APEM Inc. | 0.0 $ | 1000 | CAP TACTILE SQUARE REDSqu... |
MJ1212 | APEM Inc. | 0.0 $ | 1000 | CAP TACTILE SQUARE BLACKS... |
MJ1211FE-R52 | Ohmite | 0.01 $ | 1000 | RES 1.21K OHM 1/8W 1% AXI... |
MJ1212FE-R52 | Ohmite | 0.01 $ | 1000 | RES 12.1K OHM 1/8W 1% AXI... |
MJ1213FE-R52 | Ohmite | 0.01 $ | 1000 | RES 121K OHM 1/8W 1% AXIA... |
MJ1240FE-R52 | Ohmite | 0.01 $ | 1000 | RES 124 OHM 1/8W 1% AXIAL... |
MJ1241FE-R52 | Ohmite | 0.01 $ | 1000 | RES 1.24K OHM 1/8W 1% AXI... |
MJ1242FE-R52 | Ohmite | 0.01 $ | 1000 | RES 12.4K OHM 1/8W 1% AXI... |
MJ1243FE-R52 | Ohmite | 0.01 $ | 1000 | RES 124K OHM 1/8W 1% AXIA... |
MJ1270FE-R52 | Ohmite | 0.01 $ | 1000 | RES 127 OHM 1/8W 1% AXIAL... |
MJ1271FE-R52 | Ohmite | 0.01 $ | 1000 | RES 1.27K OHM 1/8W 1% AXI... |
MJ1272FE-R52 | Ohmite | 0.01 $ | 1000 | RES 12.7K OHM 1/8W 1% AXI... |
MJ12R1FE-R52 | Ohmite | 0.01 $ | 1000 | RES 12.1 OHM 1/8W 1% AXIA... |
MJ12R4FE-R52 | Ohmite | 0.01 $ | 1000 | RES 12.4 OHM 1/8W 1% AXIA... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...