MKS3PI-5 DC48

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MKS3PI-5 DC48 is a kind of power relays with rated current more than 2 amps. It is used for DC loads and DC motors in electrical circuits. As a power relay, the MKS3PI-5 DC48 can be used in applications ranging from switching equipment on and off to controlling auxiliary power supplies and monitoring voltage levels.

The MKS3PI-5 DC48 is an electromechanical relay consisting of several components, or parts, that help it operate including a set of normally open contact points, an armature, a coil, and a housing containing all the other components. The basic operation of the relay itself involves a set of contacts that are normally open and are closed when the coil is energized. This occurs when the voltage applied to the coil is greater than the voltage required to make the contacts close, or when the current is further increased. When the contacts close, electricity can pass through them and the circuit will be complete.

When used as a contactor, the MKS3PI-5 DC48 can be used to control the operation of other components, such as the speed and direction of a motor. The contactor can be used as an on/off switch to shut off power to the motor during certain operations, or to start the motor when a certain operation is required. The contactor can also be used as a safety device in that it can open the circuit if the motor gets too hot or the electricity gets too intense. This prevents it from damaging further components in the circuit.

The MKS3PI-5 DC48 is designed to operate at rated voltages of up to 125 volts DC and has a maximum switching current of 8A. The minimum switching voltage is 40 volts DC. The contact materials and insulation of the MKS3PI-5 DC48 are silver and polyphenylene sulphide (PPS), respectively. It has a contact form of 1C/O (1 normally open contact) and has a total capacity of 140VA and 36W. The contact resistance of the MKS3PI-5 DC48 is 20 milli-ohms.

The MKS3PI-5 DC48 is often used as a load switching device in industrial and commercial applications. It can be used to control the operation of electrical components and also for overcurrent protection. The MKS3PI-5 DC48 is commonly used in electrical applications such as motor controllers, small medical devices, solar power, and lighting systems, as well as other applications where current and voltage must be monitored and controlled.

In general, the MKS3PI-5 DC48 is a reliable and cost-effective power relay whose primary function is to provide a means for controlling voltage and current in electrical circuits. The key features of the device, including its coil, contact form, contact material, and insulation, make it highly suitable for many different electrical applications. It can be used to control motors, charge batteries, and monitor and protect against overcurrents and voltage spikes.

The specific data is subject to PDF, and the above content is for reference