MKS3PN-V-5 AC110

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power relays are essential components of many electrical and electronic systems and are used to switch circuits on and off. The MKS3PN-V-5 AC110 is an electromechanical device designed to operate at voltages up to 110 Volts AC. It is commonly used in switching power supplies and power related applications.

The MKS3PN-V-5 AC 110 comes in 2 basic configurations; single and double pole. The single pole version is suitable for applications that require the maximum current capacity of 2 Amps, and the double pole version is suitable for higher current loads, up to 4 Amps. The double pole version is sometimes referred to as a permissive switch as it has the capability of being used as a ‘permissive’ switch with no ‘on’, ’off’ or ‘delay’ switching options available.

The MKS3PN-V-5 AC110 is a latching relay, meaning that the contact set is held in the last position it was manually changed to. This feature makes the MKS3PN-V-5 AC110 suitable for many applications, including emergency stop systems, load shedding, process auto-start/shutdown, and many similar applications in the industrial automation sector. In addition, the MKS3PN-V-5 AC110 also has an active contact for power monitoring – more on this later.

The MKS3PN-V-5 AC110\'s switching operation is driven by a coil winding. When a current is passed through the winding, a magnetic field is generated which operates a set of latching contacts, allowing electric current to pass through when the field is in place. When the current is stopped or reversed, the magnetic field is turned off, and the contacts return to their original state. The coil winding is usually energized by a low voltage AC or DC signal from a switch or an electronic signal source.

The contact set of the MKS3PN-V-5 AC110 is rated up to 2 Amps at 110 Volts AC with a maximum operating voltage of 140 Volts. The contact sets are made of alloy–silver contacts, offering better reliability and longer life expectancy than conventional contact materials. The insulation between the two contact sets is designed to ensure no arcing or shorting occurs upon operation.

In addition to its two contact sets, the MKS3PN-V-5 AC110 has an auxiliary contact set, which is used to monitor the status of the main contact sets. This is particularly useful in applications where the relay must be switched off and on in a controlled manner, such as in an emergency stop system. The active contact in the MKS3PN-V-5 AC110 is rated up to 1 Amp and also features alloy-silver contacts for long-term reliability.

The MKS3PN-V-5 AC110 is rated for operation over a wide temperature range, from -40°C to 105°C. The operating life of the relay is estimated at over 10 million cycles. The MKS3PN-V-5 AC110 is also suitable for a variety of mounting and installation solutions, with convenient slots for mounting to a panel or board.

The MKS3PN-V-5 AC110 is a versatile and robust relay suitable for a variety of power related applications. It offers reliable switching backed up by long-term reliability and good temperature tolerance. Its dual contact sets and monitoring contact make it suitable for use in emergency stop systems and other power-related applications, and its full range of mounting options make it easy to install in a variety of environments.

The specific data is subject to PDF, and the above content is for reference