| Allicdata Part #: | ML1004FE-R52-ND |
| Manufacturer Part#: |
ML1004FE-R52 |
| Price: | $ 0.01 |
| Product Category: | Resistors |
| Manufacturer: | Ohmite |
| Short Description: | RES 1M OHM 1/2W 1% AXIAL |
| More Detail: | 1 MOhms ±1% 0.5W, 1/2W Through Hole Resistor Axial... |
| DataSheet: |  ML1004FE-R52 Datasheet/PDF |
| Quantity: | 1000 |
| 40000 +: | $ 0.00718 |
| Series: | Metal Devil® ML |
| Packaging: | Tape & Reel (TR) |
| Part Status: | Active |
| Resistance: | 1 MOhms |
| Tolerance: | ±1% |
| Power (Watts): | 0.5W, 1/2W |
| Composition: | Metal Film |
| Features: | -- |
| Temperature Coefficient: | ±50ppm/°C |
| Operating Temperature: | -- |
| Package / Case: | Axial |
| Supplier Device Package: | Axial |
| Size / Dimension: | 0.118" Dia x 0.354" L (3.00mm x 9.00mm) |
| Height - Seated (Max): | -- |
| Number of Terminations: | 2 |
| Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are one of the most frequently used electronic components which are used in almost all electrical circuits. ML1004FE-R52 is a special type of through-hole resistor which is suitable for both industrial and home applications.
ML1004FE-R52 is a metal oxide film resistor which has a power rating of 2 watts and a maximum voltage rating of 200 volts. This through-hole resistor is constructed using a metal oxide film resistor element and is housed in a metal-oxide plastic casing. The metal oxide film resistor element provides excellent stability over time, so it is suitable for industrial and home applications. The power rating and maximum voltage rating of the resistor also make it suitable for more demanding applications.
The ML1004FE-R52 through-hole resistor is extremely versatile and can be implemented for a variety of applications. Its most common use is in power supplies, amplifiers, and as a power dissipation element in circuit protection schemes. In power supplies, these resistors can be used in voltage division circuits, powertransformers, and driver circuits to provide a stable voltage source. In amplifiers, two or more resistors can be connected to the input/output stages of the amplifier to provide a stable gain structure. In circuit protection schemes, the ML1004FE-R52 can be connected betweenthe power supply and the load circuit to provide a current limiting device.
The ML1004FE-R52 through-hole resistor works by dissipating power in the form of heat. When the voltage across the resistor exceeds its rated maximum voltage, current will begin flowing through the resistor, causing it to dissipate power in the form of heat. This dissipated power is proportional to the product of the voltage and the current, thus providing a current limiting device. The heat generated by the resistor is dissipated through its metal-oxide plastic casing, allowing it to cool down and further stabilize the circuit.
The ML1004FE-R52 through-hole resistor is an incredibly versatile component which can be used in a variety of applications. Its high power rating and stable voltage rating make it suitable for more demanding applications, while its low cost makes it an attractive choice for home and industrial applications alike. The resistor is also easy to install and provides excellent stability over time, making it a perfect choice for those looking for a reliable resistor for their circuits.
The specific data is subject to PDF, and the above content is for reference
| Part Number | Manufacturer | Price | Quantity | Description |
|---|
| ML101(1-12) | On Shore Tec... | 6.83 $ | 1000 | TERM BLOCK MARK STRIP PRI... |
| ML100.105 | PULS, LP | 130.98 $ | 9 | DIN RAIL PSU 100W 48V 2.1... |
| ML100.109 | PULS, LP | 155.93 $ | 2 | DIN RAIL PSU 100W 24V 4.2... |
| ML100 | 7.48 $ | 1000 | MICRO TORCH MAGNA-LITE BU... | |
| ML100.100 | PULS, LP | 106.03 $ | 18 | DIN RAIL PWR SUPPLY 100W ... |
| ML100.102 | PULS, LP | 137.21 $ | 14 | DIN RAIL PWR SUPPLY 90W 1... |
| ML100.200 | PULS, LP | 149.69 $ | 14 | DIN RAIL PSU 100W 24V 4.2... |
| ML1000FE-R52 | Ohmite | 0.01 $ | 1000 | RES 100 OHM 1/2W 1% AXIAL... |
| ML1001FE-R52 | Ohmite | 0.01 $ | 1000 | RES 1K OHM 1/2W 1% AXIAL1... |
| ML1002FE-R52 | Ohmite | 0.01 $ | 1000 | RES 10K OHM 1/2W 1% AXIAL... |
| ML1003FE-R52 | Ohmite | 0.01 $ | 1000 | RES 100K OHM 1/2W 1% AXIA... |
| ML1004FE-R52 | Ohmite | 0.01 $ | 1000 | RES 1M OHM 1/2W 1% AXIAL1... |
| ML10R0FE-R52 | Ohmite | 0.01 $ | 1000 | RES 10 OHM 1/2W 1% AXIAL1... |
| ML100BS2PG | Honeywell Se... | 0.0 $ | 1000 | SENSOR SEALED GAUGE 0-100... |
| ML100PS1PC | Honeywell Se... | 0.0 $ | 1000 | SENSOR SEALED GAUGE 0-100... |
| ML100PS1PG | Honeywell Se... | 0.0 $ | 1000 | SENSOR SEALED GAUGE 0-100... |
| ML100PS2PG | Honeywell Se... | 0.0 $ | 1000 | ML STAINLESS PRESS SENSE ... |
| ML100PS2PC | Honeywell Se... | 0.0 $ | 1000 | ML STAINLESS PRESS SENSE ... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...