MLF1608A2R2MTD25 Inductors, Coils, Chokes

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed induction coils, such as the MLF1608A2R2MTD25, are one of the most commonly used components in electric and electronic circuit designs. Without an inductor, circuits may not be able to perform some of the essential functions, such as filtering, rectifying, voltage regulation, delaying and so on. Therefore, it is important to know the application area and working principle of MLF1608A2R2MTD25 so as to apply it properly in various circuits.

The MLF1608A2R2MTD25 is a surface mount fixed inductor mainly used for RF and general application circuits. It features an inductance of 2.4 nH and a maximum DC current rating of 2A. Its design is based on trimmable ferrite-core technology and has low DC resistance of 18 mΩ. The MLF1608A2R2MTD25 also has good power handling capability and low temperature coefficient of inductance. These features make the MLF1608A2R2MTD25 very suitable for filtering applications in RF circuits, such as Low Pass Filter, High Pass Filter, Band Pass Filter, Broad Band Filter, etc. It can also be used as time delay network in delay line or timing sequences applications.

As for its working principle, the MLF1608A2R2MTD25 is based on the basic magnetic induction principle. The magnetic flux will be induced by the current carries in the coils, and this flux is independent of the coils and has the loop style structure. The mathematical expression of the law can be expressed as follows: B = μ * (N*I)/L

Where, B is magnetic flux density, μ is permeability, N is the turns of coils, I is the current carried by the coils and L is the length of the coil. This equation describes the dependent relationship between B, μ, N, I and L. Therefore, by manipulating any of these values, the magnetic flux density can be adjusted.

In the MLF1608A2R2MTD25 inductors, the inductance parameter is determined by its coils. As μ remains constant, when the inductance is increased, either N or L must be decreased to maintain a constant current value. The MLF1608A2R2MTD25 is designed with a trimmable ferrite-core technology, which enables the control of its inductance value. This trimmable ferrite-core technology provides a reliable way to ensure that the inductance of the coils remains consistent even when exposed to extreme temperatures.

As mentioned above, MLF1608A2R2MTD25 is mainly used in RF circuits with filtering applications, such as Low Pass Filter, High Pass Filter, Broad Band Filter, and others. It is also used as a time delay network in delay line or timing sequences applications. By controlling the magnetic flux density, it is possible to adjust the characteristics of each of the filters to get the desired outputs. In conclusion, the MLF1608A2R2MTD25 is a highly versatile fixed induction coil with features that make it suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference