MLF1608A2R7JT000

Series:	MLF
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Multilayer
Material - Core:	Ferrite
Inductance:	2.7µH
Tolerance:	±5%
Current Rating:	30mA
Current - Saturation:	--
Shielding:	Shielded
DC Resistance (DCR):	1.15 Ohm Max
Q @ Freq:	35 @ 10MHz
Frequency - Self Resonant:	70MHz
Ratings:	--
Operating Temperature:	-40°C ~ 85°C
Inductance Frequency - Test:	10MHz
Mounting Type:	Surface Mount
Package / Case:	0603 (1608 Metric)
Supplier Device Package:	0603 (1608 Metric)
Size / Dimension:	0.063" L x 0.031" W (1.60mm x 0.80mm)
Height - Seated (Max):	0.037" (0.95mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MLF1608A2R7JT000 Application Field and Working Principle

Fixed Inductors

Fixed inductors are useful building blocks in the design of electrical circuits. These components are used to store energy and to control the current flow in a circuit. They are used in a wide variety of applications, including signal processing, power supplies, communications, motor control, and the like.The MLF1608A2R7JT000 is a type of fixed inductor that is used in a range of applications. It is an inductive component that is used to store electrical energy and/or control current flow in a circuit. It is designed to provide a low level of impedance (resistance) to the flow of current, allowing the desired amount of current to pass through it without excessive resistance or interference.The MLF1608A2R7JT000 has a self-resonant frequency of 16.4MHz. In other words, it acts as a very high frequency filter, allowing only those frequencies above 16.4MHz to pass through it. This helps to reduce noise and prevent excess current leakage in the circuit. The MLF1608A2R7JT000 also has a very low DC resistance, making it suitable for circuits with low power demands.The MLF1608A2R7JT000 is used in a variety of applications and industries. It is often found in consumer, automotive, and industrial applications. It is used to filter signals in audio and video equipment, reduce noise in power supplies, and as a booster in power amplifiers. It is also used in the medical industry to convert AC to DC power, and in the military for signal reception. The MLF1608A2R7JT000 works by using the property of inductance to store energy in an electrical current. Inductance is a property of any electrical component that stores energy in the form of a changing magnetic field. When an electrical current passes through an inductor, the magnetic field induces an opposing current, or voltage, back through the inductor. This opposing current opposes the flow of current and prevents it from increasing. This is what is known as inductive reactance, and it works to limit the amount of current that can flow through the inductor. The working principle of the MLF1608A2R7JT000 is similar to other fixed inductors, such as the air core coils or ferrite core coils. The MLF1608A2R7JT000 is composed of a magnetic core, which is usually made up of ferrite or powdered iron material, insulated wires, and a shell. The magnetic core stores the electrical energy and the insulated wires allow for the current to pass through the inductor. The shell helps to protect the inductor from external interference. This inductor can be used in circuits with both DC and AC power. It is designed to provide a dependable source of stable current, which helps to reduce the risk of errors in circuits. MLF1608A2R7JT000 is also built to withstand high temperatures, making it suitable for high-temperature applications. The MLF1608A2R7JT000 can be a cost-effective choice when compared to other inductors. Due to its high self-resonant frequency, it is capable of handling more current than other inductors at the same price. Its low DC resistance also means that it can handle higher current loads with minimal heat dissipation. In conclusion, the MLF1608A2R7JT000 is a type of fixed inductor with a wide variety of uses. It is used in applications such as signal processing, power supplies, communications, and motor control. It has a self-resonant frequency of 16.4MHz and a low DC resistance, making it suitable for circuits with low power demands. Its magnetic core stores electrical energy and its insulated wires allow for current to pass through the inductor. The MLF1608A2R7JT000 is also designed to withstand high temperatures, making it suitable for high-temperature applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description