MLG1005S3N9ST000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are passive components used in electric circuits, consisting of a coil of wire wound around a core which can either be air or a ferrite material. The inductor being discussed here is the MLG1005S3N9ST000, a type of surface-mount fixed inductor. It is a ‘nano’ inductor with a 0805 (2012 metri) package and it carries a maximum rated current of 3A.

Application Field of MLG1005S3N9ST000

Fixed inductors play an important role in electric circuits, and the MLG1005S3N9ST000 can be used in various applications. These include, but are not limited to, switched-mode power supplies, computer aided design, surge protection circuits, noise suppression circuits, dc-dc power converters, low pass filters, clock oscillators, active sport circuits and signal-conditioning applications because of its small size and high performance. Its small form factor makes it suitable for use in miniaturized circuit designs.

Working Principle of MLG1005S3N9ST000

Inductors are considered a type of energy storage device, storing energy in the form of a magnetic field created around a coil. Generally, inductors take the form of metal core inductors, which consist of wire wound around a ferrite material or air core inductors, where the wire is wound around a vacuum. The MLG1005S3N9ST000 falls into the category of a metal core inductor. In this type of inductor, an electrical current passing through the wire will create a magnetic field around the core. This magnetic field then induces a voltage in the wire, which opposes the electrical current, thus forming a self-regulating effect.

When an inductor is in a circuit, the inductor will have an impedance associated with it, or the amount of resistance an inductor creates when a current is passed through it. This impedance is at its highest when there is a sudden change in voltage or current. Thus, when a sudden change in electrical current is sensed, the inductor will absorb the surge of energy, thus protecting the other components in the circuit from any potential damage.

Inductors can also be used in branch circuits, as part of a filter or to provide energy at a certain frequency. As a filter, an inductor coupled with a capacitor will form a low-pass filter, allowing only frequencies below a certain cut-off point to pass through while rejecting any signals that are above the cut-off frequency.

The MLG1005S3N9ST000 inductor, due to its small size and high performance, can also be used in signal-conditioning applications. For instance, the inductor can be used in order to eliminate noise or interference in a signal caused by external sources. In this application, the inductor acts as an adaptive filter, filtering out any unwanted signals from the desired signal.

Conclusion

The MLG1005S3N9ST000 is a surface-mount nano inductor with a 0805 (2012 metri) package and a maximum rated current of 3A. It can be used in various applications, including switched-mode power supplies, computer aided design, surge protection circuits, noise suppression circuits, dc-dc power converters, low pass filters, clock oscillators, active sport circuits and signal-conditioning applications because of its small size and high performance. In the circuit, the inductor forms a self-regulating effect when a current is passed through, and can also be used as a filter or for signal-conditioning applications.

The specific data is subject to PDF, and the above content is for reference