MLG1608SR82JT000 Inductors, Coils, Chokes

Fixed Inductors

Fixed Inductors are electrical components mainly used for inductive loads or AC/DC conversion filtration. They are mainly used in common mode filters, converter chips, converter output LC filters, a variety of DCDC converters, automotive inverters, etc. One type of Fixed Inductor is the MLG1608SR82JT000.

MLG1608SR82JT000 Application Fields

In the MLG1608SR82JT000 Application Field, the chip is used for making filters, voltage stabilizers, rectifiers, motor reversing relays, and transformer outputs. In most of these cases, its purpose is to provide RF shielding, inductive ac, or dc isolation. Moreover, many applications in the automotive industry, such as controlling battery current, and converting voltages from one range to another, can also benefit from the MLG1608SR82JT000. It is also useful as a part of the power supply system.

MLG1608SR82JT000 Working Principle

The MLG1608SR82JT000 comes in the package of a shielded core inductor. Its output is limited to provide single-chamber inductance, with a value of up to 8.2mH. This value is calculated through its diameter, length of wire used (5mm), and the air gap between the wire and core. Due to the monolithic shield, the inductor works in a symmetrical fashion, avoiding any interference from noise sources, and thus allowing for minimal distortion in the output.

It is an inductive element based on Ferrite-Core-Inductor principle. A Typical Ferrite Core Inductor (FCI) consists of a ferrite core, a winding with wound turned cover (monolithic shield), two layers of insulated winding, and a piece of cover glass. The ferrite core is like the iron in the transformer with much loss, which helps to increase the inductance. The wires, on the other hand, act as a coil and create a magnetic field when an alternating current (AC) is applied. The windings provide energy storage, while the cover is designed to absorb parasitic radiation, and protect the device from EMI.

In the case of the MLG1608SR82JT000, the ferrite core is placed in the center, surrounded by the monolithic shield. This shield reduces interference from high-frequency signals, protecting the inductor from any unwanted doses of radiation. The two layers of insulated windings then wrap around the shield and ferrite core. Through the opening of the shield, the signal passes through the circuit, winding around the core multiple times, usually between 3 and 5, according to the design.

The MLG1608SR82JT000 inductor is used in many applications in the filtration of AC power. It is also used in DC to DC converters, providing a stable and reliable input and output voltage. The inductor is also used in DC-DC converters, transformer outputs, and automotive inverters. All these applications rely on the inductor’s capacity to shield itself from EMI and fulfill energy needs without interference or added complexity.