MLP2520V1R5MT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are a type of electrical component that inhibit or restrict the flow of electric current. The MLP2520V1R5MT is a chip-type miniature surface-mount fixed inductor targeting general-purpose application circuit for low-current use. Its features include a wide rated current range, small chip body size, and low profile. This makes the MLP2520V1R5MT especially suitable for use in high-density mounting and portable products.

In terms of physical construction, the MLP2520V1R5MT consists of a coil element surrounded by a molded resin body. The coil element consists of a highly conductive copper wire wound around a ferrite core. The wire is covered with an insulating varnish film and then covered with resin to further insulate it. This structure ensures that the magnetic flux generated by the coil element is not released until it passes through the core.

The MLP2520V1R5MT has a rated current of 0.25 Amps to 1.5 Amps. It has a maximum inductance of 20uH and a maximum DC resistance of 0.01 Ohms. The maximum operating temperature is 85 degrees Celsius, and the permissible range of soldering temperature is 260 degrees Celsius for 3 seconds at a time. The operability is rated at 10 million cycles.

In regards to its application field, the MLP2520V1R5MT is a very versatile miniature surface-mount fixed inductor. Its small size and low profile make it especially suitable for use in small, densely packed circuit boards. It is also designed for use in general-purpose circuits and is suitable for low current applications such as DC-DC converters, power supplies, and power filtering. It is also suitable for high-density mounting and portable products such as mobile phones and laptops.

The MLP2520V1R5MT’s working principle is based on Faraday’s Law of Induction. It states that when a changing magnetic field is applied to a coil, a voltage is induced in the coil that is proportional to the rate of change of the magnetic field. In the MLP2520V1R5MT, the coil is surrounded by a ferrite core. This core allows the magnetic field to pass through the coil uninterrupted, which results in the voltage being induced in the coil.

The voltage induced in the coil can then be used to produce a current in a circuit. This current is determined by the coil’s inductance value. The higher the inductance value, the higher the current. The MLP2520V1R5MT’s maximum rated inductance is 20uH, which yields a maximum current of 1.5 Amps when connected in a circuit.

Overall, the MLP2520V1R5MT is a miniature surface-mount fixed inductor targeting general-purpose application circuits. Its features include a wide rated current range, small body size, and low profile. It is also designed for use in high-density mounting and portable products such as mobile phones and laptops. The working principle is based on Faraday’s Law of Induction, and its maximum rated inductance is 20uH, yielding a maximum current of 1.5 Amps.

The specific data is subject to PDF, and the above content is for reference