MLV1206E32003T Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Transient Voltage Suppressors (TVS) and metal-oxide varistors (MOVs) are used to protect equipment and circuitry from high voltage spikes or transients. The MLV1206E32003T is a multi-layer varistor (MLV) designed for use in TVS and MOV applications. In this article, we will discuss the application field of the MLV1206E32003T and its working principle.

Application Field of the MLV1206E32003T

The MLV1206E32003T is a surface mount device designed for use in automotive and consumer electronics applications. It is suitable for use in applications where high voltage overshoot or transients may occur due to switches or inductive loads. It is ideal for use in DC/DC converters, power supplies, data converters, and other equipment that may be subject to high voltage spikes or transients.

The MLV1206E32003T has a very low capacitance, low series resistance, high peak current rating, and a low peak power rating, making it ideal for use in high voltage applications. It is also highly resistant to temperature variations, making it ideal for use in automotive applications. Finally, its low total solution size makes it suitable for use in applications where space is at a premium.

Working Principle of the MLV1206E32003T

The MLV1206E32003T is a multi-layer varistor (MLV). MLVs are nonlinear, resistor-like devices that rely on the electro-mechanical properties of their ceramic layers to limit transient voltages. When subjected to a high voltage transient, the MLV1206E32003T instantly responds by increasing the resistance between its terminals. This resistance increase reduces the surge voltage across the terminals, thus providing protection to the equipment or circuitry connected to the device.

The MLV1206E32003T also has two parameters that can be used to determine its suitability for a particular application. These parameters are the maximum clamping voltage (Vmax) and the maximum surge current (Imax). The maximum clamping voltage is the maximum voltage that can be applied across the device before it fails. The maximum surge current indicates how much transient current the device can handle before it fails.

The MLV1206E32003T also has an insulation resistance of greater than 500 megohms. This resistance ensures that the device will not conduct unwanted currents when subjected to large transient voltages. It is also highly resistant to temperature variations, providing reliable protection over a wide temperature range.

In summary, MLV1206E32003T is a multi-layer varistor designed for use in transient voltage suppression and MOV applications. It has a low capacitance, low series resistance, high peak current rating, and a low peak power rating, making it ideal for high voltage applications. It is also highly resistant to temperature variations, making it ideal for use in automotive applications. Finally, its small form factor makes it suitable for use in applications where space is at a premium.

The specific data is subject to PDF, and the above content is for reference