MM35 1R050

Series:	MM35
Part Status:	Active
Lead Free Status / RoHS Status:	--
R @ 25°C:	1 Ohms
Moisture Sensitivity Level (MSL):	--
Tolerance:	±25%
Current - Steady State Max:	50A
R @ Current:	0.001 Ohms
Diameter:	2.677" (68.00mm)
Lead Spacing:	1.339" (34.00mm)
Approvals:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Inrush Current Limiters (ICLs) are components used to limit the high inrush current that occur when new electronic equipment is powered on, especially when it is powered on with an already-charged capacitor or an electric power supply that experiences immediate heavy load. The MM35 1R050 is one of the most commonly used ICLs in the industry. In this article, we will discuss the application field and working principle of the MM35 1R050.

Application Field

The MM35 1R050 Inrush Current Limiter (ICL) is used in many applications including automotive, consumer, industrial and medical electronics. It is also used in personal computers and communication systems. Its low profile design enables easy assembly and high performance in normally closed applications. The MM35 1R050 helps protect sensitive components in electronic devices from potential damage due to inrush currents. The MM35 1R050 ICL is able to handle any level of start-up current and standby current for automotive, consumer and industrial applications. It is also capable of handling high inrush currents associated with high-power transformers, contactors, motors and other high-current applications.

Working Principle

The MM35 1R050 ICL is designed to limit the high inrush current when it is powered on and to protect the sensitive components in the electronic device from potential damage due to the sudden surge of inrush current. The MM35 1R050 works by using a resistor to limit the amount of inrush current flowing through the system. The resistor is then connected to a temperature-dependent switch, which is either open or closed depending on the temperature. During high inrush currents, the switch remains open, limiting the amount of current flowing through the system. At lower temperatures, the switch will close, allowing the inrush current to pass through the system normally. The MM35 1R050 ICL also helps protect the system from overvoltage by protecting sensitive components from spikes in the power supply voltage. This prevents the electrical components from being damaged by sudden changes in the voltage level and helps maintain the stability of the system.

Conclusion

The MM35 1R050 Inrush Current Limiter (ICL) is an integral part of the electronic industry, helping protect sensitive components in electronic devices from potential damage due to inrush currents. The component is designed to limit the high inrush current when the power is switched on and to protect the sensitive components in the electronic device from potential damage. The MM35 1R050 ICL is suitable for consumer, automotive, industrial and medical electronics, as well as personal computers and communication systems. Furthermore, the component helps protect the system from overvoltage by protecting the sensitive components from spikes in the power supply voltage, which helps maintain the stability of the system.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description