MMF315458

Series:	C2A
Part Status:	Active
Pattern Type:	Linear Weldable
Strain Range:	±3%
Resistance:	350 Ohms
Resistance Tolerance:	±0.6%
Length - Active:	0.031" (0.79mm)
Length - Overall Pattern:	0.206" (5.23mm)
Length - Overall:	0.28" (7.1mm)
Width - Active:	0.070" (1.79mm)
Width - Overall Pattern:	0.227" (5.77mm)
Width - Overall:	0.31" (8.0mm)
Operating Temperature:	-60 ~ 150°F (-50 ~ 65°C)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Strain gauges are transducers that measure the strain in a material and convert the strain into an electrical signal. The strain gauge is one of the most widely used sensors in the simulation and instrumentation field, and is used to sense the strain at any point. The strain gauge can measure strain in any direction and is able to detect very small changes in strain. The strain gauge works on the principle of resistance change when mechanical strain is applied on a material. This change in resistance is then used to determine the amount of strain in the material.

MMF315458 Application Field and Working Principle

The MMF315458 is a resistive strain gauge that is designed to measure strain in a variety of applications. It is commonly used in industrial settings to measure strain on machinery, vehicles, and other objects with complex geometries. The gauge has a small form factor and can be embedded in the material to be measured, making it a great choice for a variety of applications. The MMF315458 works on the principle of resistance change when mechanical strain is applied on a material. When strain is applied the resistance of the strain gauge increase, and when strain is released the resistance decreases. This change in resistance is then used to determine the amount of strain in the material.

Characteristics

The MMF315458 is a low cost strain gauge that offers excellent performance in a wide variety of applications. It has an excellent accuracy of 0.3%, a temperature range of -20°C to +125°C, and a maximum operating voltage of ±20V. Due to its small size, the gauge can be embedded into the material to be monitored and can be used to measure strain in any direction. The gauge also offers excellent protection against EMI, RFI, and ESD, making it a great choice for use in industrial environments.

Installation and Connections

The MMF315458 can be installed in a variety of ways. It can be embedded into the material to be monitored, soldered directly onto the monitored material, or connected to a terminal block. The gauge can be connected to various input devices, such as a data logger, computer, or data acquisition system, using a suitable cable. When connecting the gauge, it is important to ensure that the leads of the strain gauge are correctly wired, as incorrect wiring can lead to inaccurate readings.

Conclusion

The MMF315458 is a low cost resistive strain gauge which offers excellent performance and accuracy. It is widely used in industrial environments to measure strain on complex geometries and in any direction. The small form factor of the gauge allows it to be embedded into the material to be monitored and offers excellent protection against EMI, RFI, and ESD. Additionally, the gauge can be connected to various input devices to receive strain readings. The MMF315458 is an excellent choice for accurate and reliable strain measurement.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description