MMT08B064T3G Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

MMT08B064T3G is a thyristor, also known as a silicon-controlled rectifier (SCR). It is commonly used for voltage regulation, dynamic braking, and surge protection.

Application Field

MMT08B064T3G is used in a wide variety of applications, including:

• Motor speed control
• Light dimming
• Phase angle control
• AC voltage regulation
• DC voltage regulation
• Switching power supplies
• Uninterrupted power supplies (UPSs)
• Load sharing
• Motor overload protection
• Surge protection circuits

Working Principle

The MMT08B064T3G thyristor consists of three p-n junction diodes connected in series and the gate-cathode connections are used to trigger the SCR. Its operation is based on the basic principles of using 4-layer PNPN devices. Its operation can be likened to a light switch with a remote control. When the input voltage applied between the anode and the cathode of the SCR exceeds the device\'s threshold voltage, the SCR turns on. When it is energized, the SCR will conduct the forward current normally. When the current dropped below the holding current, the SCR will remain in the “on” state.

The main difference between a thyristor and a transistor is that a thyristor is a controlled switching device. The SCR can be either turned on or turned off with the application of an external signal. This is not the case with a transistor, which can only remain in one state, depending on the input signal and load conditions. Therefore, the MMT08B064T3G thyristor can be used to control DC as well as AC electrical loads.

Conclusion

The MMT08B064T3G thyristor is a versatile device which can be used in many different applications. It can be used to regulate voltage, provide surge protection, and switch power supplies or loads. Furthermore, its operation is based on the basic principles of PNPN devices, making it easy to understand and use. The main difference between a thyristor and a transistor is that the thyristor is a controlled switching device and can be used to control both AC and DC electrical loads.

The specific data is subject to PDF, and the above content is for reference