MNR02M0AJ100 Resistors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays are an important family of electronic components. The MNR02M0AJ100 is one of the many varieties of resistor networks available today. This application field and working principle will be discussed below.

MNR02M0AJ100 is a two-resistor network, specifically a stacked resistor network, consisting of two 0402 chip resistors. It is usually sold in a 8-pin square package. This network has a resistance value of 2M ohms, with tolerance of 5%. It is rated for a working voltage of 25V, and a power rating of 250mW.

The application field for the MNR02M0AJ100 is typically used in used in many different types of electronic circuit designs to isolate, separate, and control signals, and can also be used to reduce noise and provide isolation between circuits. Additionally, MNR02M0AJ100 can be used to bridge the gap between two circuits that need to interact with one another, such as providing a common ground for both circuits.

The MNR02M0AJ100 working principle is based on the resistive "divider" network, or voltage divider. This is the simplest type of voltage divider, and it works by taking a given voltage and distributing it between two resistors. The two resistors will each have a specific resistance value, and the output voltage between them will be dependant on the differences in their resistances. In this case, the two resistors are connected in series, and the output voltage is divided proportionally between the two. For example, if one resistor has a resistance of 1M ohm, and the other has a resistance of 2M ohm, then the output voltage will be divided such that 1M ohm receives two-thirds of the total voltage, and 2M ohm receives one-third of the total voltage.

Besides the voltage divider function, MNR02M0AJ100 can also affect current in a circuit. When used as an attenuator, the MNR02M0AJ100 will reduce the amount of current that flows through a circuit. This is because MNR02M0AJ100 provides resistance in the circuit, which requires additional energy to push current through. So, when the MNR02M0AJ100 is connected in series with the circuit, this resistance takes away some of the energy, and therefore causes less current to flow through.

Overall, the MNR02M0AJ100 is a versatile component that can be used in a variety of different electronic circuit designs. It is easy to use and its working principle is based on a simple design that is easy to understand. The MNR02M0AJ100 is a great way to isolate, separate, and control signals, reduce noise, and bridge the gap between different circuits. It is an important member of the resistor network family.

The specific data is subject to PDF, and the above content is for reference