MNR32J0ABJ102

Number of Pins:	4
Height - Seated (Max):	0.026" (0.65mm)
Size / Dimension:	0.122" L x 0.102" W (3.10mm x 2.60mm)
Supplier Device Package:	--
Package / Case:	1210, Convex, Long Side Terminals
Mounting Type:	Surface Mount
Applications:	Automotive AEC-Q200
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±200ppm/°C
Power Per Element:	125mW
Series:	MNR
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	2
Tolerance:	±5%
Resistance (Ohms):	1k
Circuit Type:	Isolated
Part Status:	Discontinued at Digi-Key
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

Resistor networks, or arrays, are a type of component used in electrical and electronic circuits. They are used to provide a voltage or current source or sink and can be used to create gain when used as an amplifier.The MNR32J0ABJ102 is a series of this type of component. This resistor network is a low-noise, broad-band passive component designed with a wide variety of applications in mind. It has a large number of pins (16 in total) and is constructed of high-quality substrates to provide excellent thermal, mechanical, and electrical characteristics.The MNR32J0ABJ102 is a non-inductive type of resistor network. This means that it is a single, pre-wired array of resistors with little or no stray inductance. This makes it ideal for use in high-speed digital, RF, and microwave applications.The MNR32J0ABJ102 has a max operating voltage of 250 volts and a dielectric strength of 6KV. It is designed to dissipate up to 2watts of power (in a 50-ohm system) and is available in several resistance profiles.The MNR32J0ABJ102 is commonly used in high-frequency applications, such as in RF amplifiers. It is also found in automotive applications, power amplifiers, home audio systems, and in power supply circuits.The working principle of the MNR32J0ABJ102 is based on the concept of impedance matching. For an impedance match to be achieved, the impedance seen looking into the input of an amplifier has to match the impedance of the load connected to the amplifier’s output. By connecting a resistor network to the input and output of an amplifier, the impedance mismatch between the two can be significantly reduced. This allows for maximum transfer of energy from the amplifier to the load.The MNR32J0ABJ102 is a very versatile and reliable resistor network. It is widely used in a variety of applications, from home audio systems to automotive electronics, due to its low-noise and broad-band characteristics. It is also easy to install, due to its pre-wired array design, making it a great option for anyone in need of an efficient and effective solution.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description