MOF3WVJT-77-270R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are resistors designed to fit into a hole in a printed circuit board. The MOF3WVJT-77-270R Through Hole Resistor is a type of through hole resistor designed to provide a very high resistance with a low thermal coefficient and low self-capacitance. It is ideal for use in circuits that require the extremely high resistances found in handheld circuit designs. The main feature of the MOF3WVJT-77-270R is its resistance stability over a wide temperature range.

A Through Hole Resistor is composed of a positive and negative resistive element on a ceramic chip substrate. The positive-side element is composed of a resistor body with a polishing disk that is connected to a resistor lead. The negative-side element is also composed of a resistor body with a polishing disk, but connected to a different resistor lead. The two elements are connected by a resistor-lead interface, which is composed of a printed circuit board. The resistor body and elements are then sealed inside a body case, which is usually made from plastic.

The working principle of a Through Hole Resistor is the same as any other resistor, where the current is transferred between the two resistive elements, resulting in a voltage drop across the resistor body. The voltage drop across the resistor body varies with the resistance across the elements, which is determined by the resistor-lead interface. As the resistance across the elements increases, the voltage drop across the resistor body increases as well. The resistance across the elements can be easily adjusted by varying the voltage drop across the resistor body.

The MOF3WVJT-77-270R Through Hole Resistor is designed to operate at a maximum of 27KOhm and a minimum of 0.3KOhm. The resistor body is composed of a PTFE-insulated copper solder and the resistor lead is constructed from nickel-plated brass. The resistor body is protected from external forces by a polyphenylene sulfide body case, which is designed to provide mechanical stability to the resistor. The MOF3WVJT-77-270R also features a low thermal coefficient and a low self-capacitance to ensure its stability over a wide temperature range and to minimize self-induction effects.

The MOF3WVJT-77-270R Through Hole Resistor is used in many electronics applications, including mobile phone and wireless device circuits, consumer electronics, and automotive electronics. It is also used in laptop computers, portable audio/video players, and other low-power devices. The MOF3WVJT-77-270R is also used in circuits that require high resistances, such as in communications systems and in handheld circuit designs.

The MOF3WVJT-77-270R Through Hole Resistor is an ideal choice for applications that require high resistance and stability over a wide temperature range. The resistor body is constructed from PTFE-insulated copper solder and the resistor lead is constructed from nickel-plated brass, providing the resistor with high resistance stability and minimal self-induction effects. It is also protected from external forces by a polyphenylene sulfide body case, which helps to ensure the resistor\'s stability over time. The MOF3WVJT-77-270R Through Hole Resistor is an ideal choice for applications in mobile phones, wireless devices, consumer electronics, and automotive electronics.

The specific data is subject to PDF, and the above content is for reference