MP1001G-G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are electrical components that allow current to flow in one direction while blocking current in the other. A bridge rectifier is a network of four or more diodes used to provide full-wave rectification by changing alternating current (AC) to direct current (DC). The MP1001G-G is an example of a bridge rectifier.

The MP1001G-G is a shunt type bridge rectifier that utilizes four diodes to convert Alternating Current (AC) electricity into Direct Current (DC). Its main purpose is to convert power from AC sources, such as a mains power supply, into DC power for use in electronic circuits.

The MP1001G-G is a single-phase bridge rectifier module with a maximum load current of 1A. It is rated for up to 400V peak AC input with a direct current output of between 4.0V and 400V. The MP1001G-G is designed to operate in temperatures of between -40°C and +85°C with the input and output terminals isolated from the mounting plane.

The MP1001G-G is commonly used in applications such as solar panel inverters and DC power supplies that require stable, full-wave rectified output voltage with low ripple and input mains voltage variation. Other applications include motor control, UPS systems, educational experiments, and 3-phase converters.

The working principle of the MP1001G-G is based on the fact that when a forward-biased diode is connected to an AC source, the diode will conduct during the positive half cycle of the AC wave, and will block the current during the negative half cycle. This allows for the positive half cycle of the AC wave to be converted into voltage, or energy, that can be used in an electronic circuit.

When four diodes are connected in a bridge configuration, the two diodes on the "positive" side of the bridge will conduct during the positive half cycle of the AC wave, and the two diodes on the "negative" side of the bridge will conduct during the negative half cycle. This allows for both positive and negative half cycles of the AC wave to be converted into usable energy, resulting in full-wave rectification.

The MP1001G-G is also designed with built-in protection features to ensure its safety and reliability. These features include thermal protection, peak output current limiting, and self-resetting thermal fuses. The peak output current limiting feature monitors and limits the current through the diodes while self-resetting thermal fuses protect the module from overheating.

In summary, the MP1001G-G is an inexpensive and reliable single-phase bridge rectifier module designed for applications that require full-wave rectification and low ripple. It utilizes four diodes in a bridge configuration to convert AC to DC and comes with several built-in protection features to ensure its safety and reliability. The MP1001G-G is a cost-effective solution for many applications, ranging from solar panel inverters to educational experiments.

The specific data is subject to PDF, and the above content is for reference