MP2565DQ-LF-P Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MP2565DQ-LF-P is a synchronous DC-DC step-down power converter, and it can be used in different applications to provide a stable power supply and to optimize efficiency, audio quality, and heat dissipation. It is a Pulse Width Modulated (PWM) voltage regulator that works in a switching mode with a low input voltage and a wide range of outputs.

The MP2565DQ-LF-P belongs to the PMIC (Power Management Integrated Circuit) Voltage RegulatorsDC DC Switching Regulators category.

This type of switching regulator is designed for power conversion applications with a wide input voltage range and output range, and features a high efficiency, low noise and low cost.

The MP2565DQ-LF-P offers excellent accuracy, transient response, and output voltage accuracy of +/-2%. It utilizes synchronous rectification technology, which enables efficiency to reach as high as 95%.

This type of voltage regulator operates in a pulse width modulation (PWM) mode that produces a steady output voltage across its output terminals. The two input terminals are connected to an input voltage source, while the two output terminals are connected to an output load. The PWM switching frequency of the device is adjustable between 300 kHz and 2.2 MHz, allowing for a wide range of operation.

The working principle of the MP2565DQ-LF-P is based on the PWM control. A regulated voltage is produced through the presence of a voltage feedback loop circuit that monitors the output voltage. When the output voltage rises above the reference level, the feedback circuit activates the internal power transistor. This forces the main switch to close and the output voltage is reduced. On the other hand, when the output voltage is lower than the reference level, the power transistor is turned off and the main switch opens, allowing the output voltage to rise again.

As a result, a steady output voltage is achieved that is regulated through this feedback process. The difference between the input voltage and output voltage is also referred to as the \'ripple\'. This ripple is worsened by higher loads and frequency.

The MP2565DQ-LF-P is designed to offer a high level of output voltage accuracy, power conversion efficiency, and low operating temperature. It also offers a wide range of features such as over-voltage protection, over-current protection, over-temperature protection, short circuit protection, and soft-start.

The MP2565DQ-LF-P has several applications, including power management for IoT, automotive, consumer electronics, industrial, and medical technology. It can be used for charging Li-ion batteries, providing power supply for LED lighting systems, and providing power conversion in automotive and industrial applications.

The MP2565DQ-LF-P is an excellent choice for a wide range of applications, providing a high level of efficiency, safety, and stability. With its wide input voltage range and adjustable PWM switching frequency, it is an excellent solution for power conversion applications.

The specific data is subject to PDF, and the above content is for reference