Allicdata Part #: | MP850-5.00-F-ND |
Manufacturer Part#: |
MP850-5.00-1% |
Price: | $ 5.99 |
Product Category: | Resistors |
Manufacturer: | Caddock Electronics Inc. |
Short Description: | RES 5 OHM 50W 1% TO220 |
More Detail: | 5 Ohms ±1% 50W Through Hole Resistor TO-220-2 Mois... |
DataSheet: | MP850-5.00-1% Datasheet/PDF |
Quantity: | 126 |
1 +: | $ 5.44050 |
10 +: | $ 5.10120 |
100 +: | $ 3.62736 |
1000 +: | $ 2.98845 |
Series: | Kool-Pak®MP800 |
Packaging: | Tube |
Part Status: | Active |
Resistance: | 5 Ohms |
Tolerance: | ±1% |
Power (Watts): | 50W |
Composition: | Thick Film |
Features: | Moisture Resistant, Non-Inductive |
Temperature Coefficient: | -20/ +50ppm/°C |
Operating Temperature: | -55°C ~ 150°C |
Package / Case: | TO-220-2 |
Supplier Device Package: | TO-220 |
Size / Dimension: | 0.410" L x 0.125" W (10.41mm x 3.18mm) |
Height - Seated (Max): | 0.650" (16.52mm) |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors
A through hole resistor, also known as a through-hole mount resistor, is an electrical component used in many applications. They are particularly useful in high-temperature and high-voltage applications, where their compact size and robust construction make them ideal. The term "through hole resistor" refers to a type of resistor with leads that are passed through a hole in the circuit board or chassis, then soldered into place.
The MP850-5.00-1% is a through hole resistor designed for a wide range of applications. It is a two-terminal device, with one terminal connected to the resistor chip\'s ceramic substrate. The other terminal is typically connected to ground or a source of power. This particular resistor provides a stable 1% resistor tolerance over a wide range of temperature and voltage conditions.
The MP850-5.00-1% through hole resistor is constructed using a nitride-over-silicon active layer. This active layer is layered between two layers of aluminum oxide. The aluminum oxide layers are designed to act as dielectric layers, while the active layer provides the electrical resistance of the resistor. The combination of these layers results in a resistance that is consistent and stable under a wide range of operating conditions.
The resistive layer of the MP850-5.00-1% through hole resistor is also designed to provide superior thermal conductivity. This feature allows the resistor to dissipate heat quickly, which helps to extend its useful life even under adverse conditions. The resistor\'s leads are also constructed using stainless steel, which further improves its thermal conductivity and increases its overall durability.
Because of its robust construction, the MP850-5.00-1% through hole resistor is perfect for a wide range of applications. It is commonly employed in low-power circuits, where its low self-heating characteristics make it an ideal choice. It is also commonly seen in automotive applications, where its durability and consistent performance in high-vibration environments make it a go-to resistor for many engineers.
The MP850-5.00-1% through hole resistor is also commonly used in precision measuring instruments. Its resistance accuracy makes it ideal for adjusting the output of circuits and calibrating measuring instruments. Its relatively small size and superb thermal conductivity make it doubly useful in these types of applications.
Finally, the MP850-5.00-1% through hole resistor is a regular fixture in high-reliability applications. Its robust construction and resistance accuracy make it a go-to component for high-reliability applications, such as line power systems, medical equipment and industrial control systems.
In conclusion, the MP850-5.00-1% through hole resistor is a versatile and reliable resistor. Its reliable 1% resistance accuracy and superior thermal conductivity make it an ideal choice for a wide range of applications, from low-power circuits to high-reliability systems. As such, it is no surprise that the MP850-5.00-1% through hole resistor is one of the most commonly used components in today\'s electronics.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
MP850-100-1% | Caddock Elec... | 5.35 $ | 2010 | RES 100 OHM 50W 1% TO2201... |
MP850-200-1% | Caddock Elec... | 5.35 $ | 1243 | RES 200 OHM 50W 1% TO2202... |
MP850-1.00K-1% | Caddock Elec... | 5.35 $ | 579 | RES 1K OHM 50W 1% TO2201 ... |
MP850-50.0-1% | Caddock Elec... | 5.35 $ | 583 | RES 50 OHM 50W 1% TO22050... |
MP850-75.0-1% | Caddock Elec... | -- | 713 | RES 75 OHM 50W 1% TO22075... |
MP850-20.0-1% | Caddock Elec... | 5.35 $ | 443 | RES 20 OHM 50W 1% TO22020... |
MP850-10.0-1% | Caddock Elec... | -- | 196 | RES 10 OHM 50W 1% TO22010... |
MP850-2.00-1% | Caddock Elec... | 5.99 $ | 1352 | RES 2 OHM 50W 1% TO2202 O... |
MP850-1.00-1% | Caddock Elec... | 5.99 $ | 604 | RES 1 OHM 50W 1% TO2201 O... |
MP850-0.50-1% | Caddock Elec... | 6.19 $ | 1208 | RES 0.5 OHM 50W 1% TO2205... |
MP850-5.00-1% | Caddock Elec... | 5.99 $ | 126 | RES 5 OHM 50W 1% TO2205 O... |
MP850-25.0-1% | Caddock Elec... | 5.35 $ | 146 | RES 25 OHM 50W 1% TO22025... |
MP850-500-1% | Caddock Elec... | 5.35 $ | 99 | RES 500 OHM 50W 1% TO2205... |
MP850-0.20-1% | Caddock Elec... | 6.19 $ | 30 | RES 0.2 OHM 50W 1% TO2202... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...