MP9100-30.0-1%

Series:	Kool-Pak®MP9000
Packaging:	Tube
Part Status:	Active
Resistance:	30 Ohms
Tolerance:	±1%
Power (Watts):	100W
Composition:	Thick Film
Features:	Moisture Resistant, Non-Inductive
Temperature Coefficient:	-20/ +80ppm/°C
Operating Temperature:	-55°C ~ 175°C
Package / Case:	TO-247-2
Supplier Device Package:	TO-247
Size / Dimension:	0.620" L x 0.195" W (15.75mm x 4.95mm)
Height - Seated (Max):	0.825" (20.96mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of Thru-hole Resistors

Thru-hole Resistors, also known as axial leaded resistors, are resistors that have two lead wires that extend in opposite directions from the cylindrical casing of the resistor. The leads are then bent or cut so that they can be inserted through a round or square hole in the circuit board or component. They have been around for decades and are still widely used in both through-hole and surface-mount design.Thru-hole resistors have a variety of advantages over surface mount resistors, including:

• Owing to their leaded construction, Thru-hole resistors are much easier to handle and assemble than surface mount resistors. This makes them ideal for lower-volume assembly tasks, where time is at a premium. In addition, they can also be used for prototyping and debugging, where the leads of the resistors can be easily modified to suit the circuit.
• Thru-hole resistors are very reliable due to their construction. The wires of the leads are firmly attached to the body of the resistor, eliminating the possibility of failure due to incorrect mounting.
• Thru-hole resistors are available in a wide range of values, from very small to very large. This makes them suitable for applications that require a specific resistance value, such as voltage dividers and current limiters.
• Thru-hole resistors are also easy to repair and replace in the event of failure. The leads can be pulled out and a new resistor can be inserted in its place.

MP9100-30.0-1% Application Field and Working Principle

The MP9100-30.0-1% is a thru-hole resistor from the MP Series of Axial Leaded Resistors manufactured by TE Connectivity. It is most suited to applications that require high precision and low noise levels. It has a tolerance rating of 1%, and is rated for operation from -55°C to +125°C, making it ideal for use in both indoor and outdoor environments.The MP9100-30.0-1% has a resistance of 30 ohms and is designed for power ratings of up to 0.5 watts. The resistor has an axial leaded construction, with two lead wires that extend from the body of the resistor. The leads are then bent and cut so that they can be inserted through a hole in the circuit board or component.In operation, the resistor resists the flow of an electric current, dissipating the energy of the current in the form of heat. This resistance is determined by the materials used in the resistor, and in the case of the MP9100-30.0-1%, the resistor uses a thin film of semiconductor material that is laser trimmed for high precision.The MP9100-30.0-1% is designed for a wide variety of applications, including power supply circuits, signal conditioning circuits, relieving voltage peaks in power lines, current limiting circuits, and signal noise attenuation. The resistor is also very reliable, with a long life span and excellent temperature stability.

Conclusion

Thru-hole resistors are an essential component of both through-hole and surface-mount design. They offer several advantages over surface mount resistors, including ease of handling, reliability, a wide range of values, and easy repair and replacement. The MP9100-30.0-1% is a thru-hole resistor that is suitable for precision applications that require a high level of accuracy. It is designed for a power rating of up to 0.5 watts and is rated for operation from -55°C to +125°C, making it ideal for use in both indoor and outdoor environments. The resistor is also very reliable, with a long life span and excellent temperature stability.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description